Metrel Instruments Ltd, incorporating Alphatek, have a wide range of instruments to cover your needs in today's exacting requirements. Glanford Electronics Limited can supply, repair and calibrate the full range of Metrel instruments. We would be please to advise on which instrument would be best suited to your needs, please apply for details OmegaPAT Portable Appliance Tester MI3304 Metrel’s top of the range measuring instrument for electrical safety testing of a wide range of (portable) electrical appliances, IT equipment, IEC cords and portable RCDs with corresponding IEC/EN and VDE standards. New PAT Plus instruments are suitable for periodic testing, troubleshooting or as a tool for electrical safety in workshops. They can be connected to 115V and 230V mains supply voltage. Instruments are placed in robust, waterproof case. Over 100 pre-programmed auto test sequences cover most of the test requirements. User can define up to 50 additional customized auto tests. Barcode labels and reader enable super fast auto-testing and appliance identification. QWERTY keyboard allows easy data entries. Serial printer can be connected to the instrument to print out selected test results. Immediate test result printout facility is enabled with special designed mobile label printer available as accessory. Labels 50 x 30 mm can be printed and posted on tested appliance immediately after test is finished. Metal holder delivered with printer enables fast mounting on outer side of OmegaPATPlus or BetaPATPlus instrument cover – simple and effective solution for unlimited freedom when test site needs to be changed frequently. Professional PC SW PAT Link PRO enables viewing and advanced analysing of measurement results (comparison/trends for selected appliance) including comparison, storing of results for documentation, printing of test reports. The following test are supported: earth bond continuity test with currents up to 25 A insulation resistance, leakage current (differentinal, substitute and touch), functional test, dielectric withstanding test 1500 V and 3000 V AC (MI 3305 only), polarity test of IEC cord, TRMS leakage and load current measurement using clamp current adapter and trip-out time measurement of portable RCDs. Features: User-friendly graphic user interface (GUI), instrument personalization to user needs, barcode reader and serial printer support, saving auto test results with important information, quickly searching of test results using special filters, downloading/uploading auto test results to/from PC, test results comparison/trends and label printing.     Mi3002 Multifunction Tester The MI 3002 EurotestDL is the ideal unit for engineers who perform high volume testing or work regularly on TT, TN and IT systems. Containing all the necessary tests for installation testing, the MI 3002 EurotestDL can also perform online voltage monitoring, and phase sequence testing. All results can be quickly saved and referenced on the unit while out on site and can be downloaded via the EuroLink PRO software, included in the standard set, to the computer for evaluation of report generation after testing (optional PRO Plus software automatically completes selected NICEIC forms). Features Include: Fuse tables - Built in fuse tables allow for automatic pass/fail evaluation of loop readings according to the regulations. Upgradable - unit can be upgraded to keep up to date with the latest regulations. Downloadable - Downloads via RS232 or USB cable via the soft-ware included with the unit. Memory - Unit stores up to 500 results in a multi-layer memory structure. Help screens - Each test has their own individual help screen describing how to perform a measurement. Multi-system testing - Tests on TT & TN systems, IT systems and 110 V systems. Built-in charger - Unit has an in-built charging circuit and comes complete with a set of recharge-able NiMH batteries. APPLICATION: Initial and periodic testing of domestic installations. Initial and periodic testing of industrial installations. Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. Auto-ranging bar segment display Complete with a rugged rubber housing     MI2142 Alphapat Portable Appliance Tester Metrel MI2142 Alphapat. High performance measuring instrument for electrical safety testing of portable appliances, IT equipment and IEC cords in accordance with corresponding IEC/EN and VDE standards. Measuring Functions Complete selection of test functions and lightweight design make AlphaPAT as excellent tool for periodic testing of portable appliances either as field tester or as a bench instrument. Test functions comprise: DC insulation resistance measurement, PE voltage drop / earth bond continuity test, leakage current measurement, current measurement with current clamps and functional test. Other features 120 pre-programmed Autotest sequences that give information on allowed standard-set limits for all test parameters can essentially improve working efficiency. Possibility to create and store Custom Autotests sequences. Alphanumeric keyboard for specific data entries (appliance description, location, etc.) Appliance identification and access to the test sequence via Barcode reader or RFID tags. Included; * Earth Bond/Touch Leakage clip * Mains cable * Carrying bag * PC SW Pat Link with RS 232 cable * Instruction manual * Declaration of conformity * Production verification data Dimensions (w x h x l): 265 x 110 x 185 mm Weight(without accessories): 3.5 kg Mi 3302 Metrel SwiftPAT Portable Appliance Tester Very quick and simple to use, 0.1Ohm and 0.5Ohm pass levels Indicated by LED display. Pass an fall of all tests, pre-set by tester, tests all equipment including IT. Features Include: Quick and simple to use Tests all equipment 1101/, 230V and 415V Tests IT equipment (computers, etc.) Earth Bond Test at 25A and 100mA Limits on sub leakage up to 35mA Built it buzzer and timer tor all tests Individual pass and tail of all tests by LED display Individual test PASS/FAIL indication with overall PASS/FAIL result displayed simultaneously on screen Earth Bond pass levels indicated better than 0.1Ohm or 0.5Ohm Comes complete with earth bond lead, 110V adapter, carry case, conformity certificate and certificate of calibratii Meets the requirements of the NEW I EE Guidance notes on pass levels tor itsulation test i.e. 1M tor Class 1 Equipment & 2M for Class 2 Equipment Weighs less than 2.8kg TEK 265 'Pocket Size' Digital Multimeter with Back Light Features Include: Rugged design in a rubber housing Compliant with EN61010 LVD CATII 600 Volt DC Current 200µA - 10A ± 1.0% ± 2 DC Voltage 200mV - 600V ± 0.5% ± 2 AC Voltage 0 - 600V ± 1.2% ± 2 Continuity buzzer Diode test Transistor test Data hold Back lit display, 1999 count Polarity Indication Resistance range 0-200Ω - 2MΩ ± 0.8% ± 2 Built in stand Overload protection     TEK 1360 4 in 1 Professional Environmental Meter A true 4 in 1 Meter which features: Digital Light Meter, Digital Sound Level Meter, Digital Relative HumidityMeter, Digital Temperature Meter. Light measuring range: 0.01 to 20,000 Lux Sound Level measuring range: A: Low weighting 35-100 dB A: High weighting 65-100 dB C: Low weighting 35-100 dB C: High weighting 65-130 dB Relative Humidity measuring range: 25% - 95% RH Temperature measuring range: -20°C to 750°C or 4°F to 1400°F Large 3½ digit LCD Display Easy to use Supplied Complete with ALL Sensors Complete with Case and Battery MAX Hold Feature DATA Hold Feature Low Battery Indication A True Professional Instrument Save £'s on buying individual instruments Complete with wind muffler Please send for Brochures on the range of Metrel Instruments.