Crystal Engineering XP2i

£825.00
In stock
SKU
Crystal Engineering XP2i
Crystal Engineering XP2i Atex Intrinsically Safe Digital Pressure Gauge. The XP2i comes in two basic versions, a plain pressure gauge, or a datalogging pressure gauge. Measuring scales include, PSI, bar, kPa, and Absolute Pressure. There are other versions in the series. If you do not see the item you require, please contact us for further information. Atex approved
Intrinsically Safe Atex approved pressure gauges are a must for explosive atmospheres. The Crystal Digital XP2i meets the Atex approval requirements, is very rugged and water resistant to IP66. The case and sensor are made of stainless steel to provide resistance to corrosion as well as an excellent barrier to emissions from electrically noisy equipment. The case is water resistant to IP66, with a replaceable filter in the sensor to keep out debris. Crystal XP2i pressure gauges have the ability to survive large over-pressure events with no change in calibration. The XP2i is very easy to use. No menus - just buttons. They can be calibrated via the keypad or the RS232 port. The Crystal XP2i is very accurate and is rated in percent of reading. They are not affected by ambient temperature, and are fully temperature compensated, so the accuracy is the same over the entire operating temperature range. The XP2i comes in two basic versions, a plain pressure gauge, or a datalogging pressure gauge. Measuring scales include, PSI, bar, kPa, and Absolute Pressure.
Features
  • Rugged, intrinsically safe, digital test gauge with 0.1% of reading accuracy
  • Accuracy not affected from -10 to 50°C
  • Easy to use
  • Marine grade enclosure resists corrosion
  • Can replaces 5 or more digital test gauges
  • Fast pressure safety valve (PSV) mode
  • Custom pressure units can be defined
With the optional DataLoggerXP upgrade:
  • Record 32 000 data points
  • Battery-optimizing, Ultra Low Power (ULP) Mode
  • Over an entire year of continuous recording time
  • Now available on the Dual-Line Display XP2i
Applications
  • Field gauge calibration
  • Permanent outdoor installation
  • Pressure safety valve (PSV) testing
  • Torque datalogging
  • Pressure regulator testing
  • Pipeline static pressure testing
  • Chart recorder replacement
  • Filter performance testing
  • Hydrostatic leak testing
Specifications
Accuracy
  • 0 to 20% of range:
  • ±(0.02% of Full Scale)
  • 20% to 100% of range:
  • ±(0.1% of Reading)
  • Vacuum:
  • ±(0.25% of Full Scale*)
  • * Full Scale = -14.5 PSIG
OperatingTemperature
  • Temperature range:
  • -10°C to 50°C (14°F to 122°F)
Display
  • Screen:
  • 5 digits, 16.5 mm (0.65") high
  • Display Rate:
  • 3 readings/second (standard) 7 readings/second (PSV mode)
Power
  • 3 x AA:
  • 1500 hours, typical
Data Communiction
  • Digital Interface:
  • RS232, DB-9F
DataLogging
  • Capacity:
  • Approx. 6000 data points
  • Storage type:
  • Non-volatile flash memory
  • Minumum Interval:
  • 1 second
  • Maximum Interval:
  • 18 hours
  • Min. event duration:
  • 333 mS (min/max enabled)
Enclosure
  • Weight:
  • 562 g (19.8 oz)
  • Rating:
  • IP67
  • Housing:
  • Diecast aluminum
  • Keypad and labels:
  • UV Resistant Polyester
Atex approved
C/w Free Calibration Certificate Traceable to National Standards
More Information
Brand Crystal Engineering
Write Your Own Review
You're reviewing:Crystal Engineering XP2i
Your Rating

Our Best Selling Products