The ETI 8100 Plus pH meter is a three-in-one instrument which features a large easy to read, LCD display, this indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9 °C with a resolution of 0.1 °C.
The LCD displays both low battery indication and an user selectable backlight.
The ETI 8100 Plus pH meter readings are either automatically or manually temperature compensated over the operating range of 0 to 100°C. To automatically compensate, it is necessary to use a thermistor temperature probe.
Each ETI 8100 Plus pH meter incorporates an auto-power off facility that automatically turns the instrument off after ten minutes thus maximising battery life. The ETI 8100 Plus pH meter has an integrated rubber seal to ensure complete water resistance and helps to reduce the possibility of damage in harsh environments. At the touch of a button, the instrument will automatically re-calibrate (2-point autocal) itself when used in conjunction with pH buffer solutions. Each unit incorporates an easy to use BNC connector and waterproof Lumberg screw-locking type connector, allowing a wide range of interchangeable thermistor probes to be used.
Specification
pH
mV
Temperature
range
0 to 16 pH
± 1000mV
-39.9 to 149.9°C
resolution
0.01 pH
1mV
0.1°C
accuracy
±0.02pH
±1mV
±0.4°C (-10 to 70°C)
battery
3 x 1.5 volt AAA
battery life
max 5 years (2500) hours
sensor type
combination electrode/thermistor
display
12mm LCD
dimensions
32 x 71 x 141mm
weight
230 grams
ETI 8100 pH meter comes complete with a Calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding ETI 8100 pH meter