Fluke 325 True RMS Clamp Meter

Fluke 325 True RMS Clamp Meter

Fluke 419D Laser Distance Meter

Fluke 419D Laser Distance Meter

Fluke 414D Laser Distance Meter

was £138.00 Special Price £118.80 £99.00
In stock
Only 0 left
SKU
Fluke 414D Laser Distance Meter

The Fluke 414D Laser Distance Meter is a big step up from the common tape measure and it's much easier to use. Just point and click. No scales to interpret or misread.

Fluke 414D Laser Distance Meter delivers professional-grade distance measurements quickly and easily

The Fluke 414D Laser Distance Meter is a big step up from the common tape measure and it's much easier to use. Just point and click. No scales to interpret or misread.

The Fluke 414D Laser Distance Meter measures up to 50 meters (165 ft.), with 2 mm (0.08 in) accuracy and the extra bright laser makes targeting easy.

This professional-grade laser distance meter is fast and easy to use to help improve accuracy and reduce measurement errors. You'll save time and money at every step.

Fluke 414D Laser Distance Meter features:

  • Offers minimum/maximum tracking to measure the room’s diagonal and horizontal distance from a stable measurement point
  • Stores up to five measurement results
  • Provides audible keypad feedback
  • Offers battery life of 3000 measurements with automatic shut-off feature
  • Presents measurements on two-line display with display hold
  • Powered by two AAA batteries

Distance Measurement

Typical measuring tolerance 1

±2.0 mm 3

Maximum measuring tolerance 2

±3.0 mm 3

Range At Leica Target Plate GZM26

50 m / 165 ft

Typical range 1

40 m / 130 ft

Range at unfavourable condition 4

35 m / 115 ft

Smallest unit displayed

1 mm / 1/16 in

Ø Laser point at distances

6 / 30 / 60 mm (10 / 50 / 100 m)

Tilt Measurement

Measuring tolerance to laser beam 5

No

Measuring tolerance to housing 5

No

Range

No

General

Laser class

2

Laser type

635 nm, < 1 mW

Protection class

IP40

Automatic laser off

After 90 seconds

Automatic power off

After 180 seconds

Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03

Up to 3,000 measurements

Size (L x W x D)

116 x 53 x 33 mm

Weight (with batteries)

113 g

Temperature range
Storage operation

-25°C to +70°C (-13°F to +158°F)

0°C to +40°C (32°F to +104°F)

Calibration cycle

Not applicable

Maximum altitude

3000 m

Maximum relative humidity

85% at 20°F to 120°F (-7°C to 50°C)

Safety

IEC Standard No. 61010-1:2001

EN60825-1:2007 (Class II)

EMC

EN 55022:2010

EN 61000-4-3:2010

EN 61000-4-8:2010

1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C.
2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.
3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.
5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.

 

Fluke 414D Laser Distance Meter comes complete with a calibration Certificate Traceable to National Standards when purchased new.

Contact us for further information regarding the Fluke 414D Laser Distance Meter

More Information
Brand Fluke Instruments
Write Your Own Review
You're reviewing:Fluke 414D Laser Distance Meter
Your Rating

Our Best Selling Products