Fluke 414D Laser Distance Meter

Fluke 414D Laser Distance Meter

Fluke 424D Laser Distance Meter

Fluke 424D Laser Distance Meter

Fluke 419D Laser Distance Meter

was £262.80 Special Price £224.40 £187.00
In stock
Only 0 left
SKU
Fluke 419D Laser Distance Meter

Fluke 419D Laser Distance Meter extends your reach to 80 meters with high accuracy

Fluke 419D Laser Distance Meter extends your reach to 80 meters with high accuracy

You can use the Fluke 419D laser distance meter to measure up to 80 m (260 ft.), accurate to + 1 mm. No scales to interpret or misread.

The extra bright laser makes it easy to target even at long distances. The Fluke 419D laser distance meter will help you save time and reduce errors with enhanced features like storage for 20 complete displays, indirect Pythagoras distance calculations, and the tripod mode for stable, long-distance measurements.

You'll be able to see the results more easily on the backlit display. No matter your job, the Fluke 419D laser distance meter provides accurate long-distance measurements to help you do the work of two people on your own.

Fluke 419D laser distance meter features:

  • Improves visibility with backlit, three-line display
  • Offers minimum/maximum tracking to measure the room’s diagonal and horizontal distance from a stable measurement point
  • Offers battery life of 5000 measurements with automatic shut-off feature
  • Allows mounting on a tripod for stable long-distance measurements
  • Includes stake out function for marking off defined measured lengths
  • Offers improved visibility with three-line, backlit display
  • Stores the last twenty 20 complete displays for quick recall
  • Provides strong environmental protection with IP54 (water spray and dust proof) sealing
  • Powered by two AAA batteries

Distance Measurement

Typical measuring tolerance 1

±1.0 mm 3

Maximum measuring tolerance 2

±2.0 mm 3

Range at Leica Target Plate GZM26

80 m / 260 ft

Typical range 1

80 m / 260 ft

Range at unfavorable condition 4

60 m / 195 ft

Smallest unit displayed

6 / 30 / 60 mm (10 / 50 / 100 m)

Ø Laser point at distances

6 / 30 / 60 mm
(10 / 50 / 100 m)

Tilt measurement

Measuring tolerance to laser beam 5

No

Measuring tolerance to housing 5

No

Range

No

General

Laser class

2

Laser type

635 nm, < 1 mW

Protection class

IP54

Automatic laser off

After 90 seconds

Automatic power off

After 180 seconds

Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03

Up to 5,000 measurements

Size (L x W x D)

127 x 56 x 33 mm

Weight (with batteries)

153 g

Temperature range Storage operation

-25°C to +70°C (-13°F to +158°F)

-10°C to +50°C (14°F to +122°F)

Calibration cycle

Not applicable

Maximum altitude

3000 m

Maximum relative humidity

85% at 20°F to 120°F (-7°C to 50°C)

Safety

IEC Standard No. 61010-1:2001

EN60825-1:2007 (Class II)

EMC

EN 55022:2010

EN 61000-4-3:2010

EN 61000-4-8:2010

1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C.
2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.
3.Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.
5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.

 

Fluke 419D laser distance meter comes complete with a calibration Certificate Traceable to National Standards when purchased new.

Contact us for further information regarding the Fluke 419D laser distance meter

Write Your Own Review
You're reviewing:Fluke 419D Laser Distance Meter
Your Rating

Our Best Selling Products