Kewtech KT65DL Multifunction Tester

Kewtech KT65DL Multifunction Tester

Kewtech KT72 PAT Tester

Kewtech KT72 PAT Tester

Kewtech KT71 PAT Tester

was £690.00 Special Price £394.80 £329.00
Availability: In stock
SKU
Kewtech KT71 PAT Tester

The Kewtech KT71 PAT Tester is aimed at users of manual Pat testers and also offers the added convenience of automatic test sequences.

Kewtech KT71 PAT Tester

The Kewtech KT71 PAT Tester is a hand-held portable appliance tester, performing four functions to ensure the Safety of Class I and Class II appliances. Readings are displayed on a large liquid crystal display (LCD) below which are four bicolour LEDs, which unambiguously display a pass or fail indication for results dictated by the IEE Code of Practice.

This instrument is suitable for performing tests as required by the following standard.

The IEE Code of Practice for In-service Inspection and Testing of Electrical Equipment: 2003

This instrument is designed to check the electrical safety of appliances of Class I and Class II categories.

As a guide the IEC standard define these two categories as follows:

Class I: Appliances which have a functional insulation throughout and an earth connected case. These are often described as earthed appliances.

Class II: Appliances which have both functional and additional insulation where any metal parts cannot become “Live” under fault conditions.


The Kewtech KT71 PAT Tester is aimed at users of manual Pat testers and also offers the added convenience of automatic test sequences.
A single position on the rotary dial indicates the type of test, for instance a Class I for IT equipment.


The start button starts the sequence and LEDs will indicate the state of each test. Green for pass-and red for fail and the actual test result is also displayed for recording. 

 Kewtech KT71 PAT Tester features:

  • Performs Earth bond at 200mA for IT appliances and high current at 20A for all other appliances
  • 250V / 500V insulation test voltages
  • Run / leakage test
  • Single rotary dial position initiates test sequence
    • Class I IT 200mA Earth Bond
    • Class 1 20A Earth Bond
    • Class II
    • Extension lead test
  • LED indication of pass / fail as well as a result display
  • Automatic check if appliance is switched on or not.
  • Tests 110V appliances for earth bond and insulation (with appropriate test adaptor).
  • Tests in accordance with the IET (IEE) Code of Practice

Kewtech KT71 PAT Tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.

Contact us for further information regarding the Kewtech KT71 PAT Tester

Write Your Own Review
You're reviewing:Kewtech KT71 PAT Tester
Your Rating

Our Best Selling Products