TPI 709R Flue Gas Combustion Analyser

Be the first to review this product

was £432.00 Special Price £406.80 £339.00

Availability: In stock

The TPI 709R Flue Gas Combustion Analyser is an easy to use analyser designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.

Kit 1: All standard accessories plus A740 IR printer
Kit 2: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps
Kit 3: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps, CPA1 Probe Kit
Kit 4: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps, 719 Gas Sniffer
Kit 5: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps, CPA1 Probe Kit, 719 Gas Sniffer

Kits

Kit 1: All standard accessories plus A740 IR printer + £121.14 £100.95

Kit 2: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps + £145.14 £120.95

Kit 3: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps, CPA1 Probe Kit + £205.14 £170.95

Kit 4: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps, 719 Gas Sniffer + £205.14 £170.95

Kit 5: All standard accessories plus A740 IR printer, 2x CK21M Pipe Clamps, CPA1 Probe Kit, 719 Gas Sniffer + £265.14 £220.95

Qty

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

The Easy-To-Use, TPI 709R Flue Gas Combustion Analyser designed to measure CO, O2, Temperature & Pressure and calculate CO2 (in a flue), CO/CO2 ratio, efficiency and excess air. With a large, easy-to-read, backlit display, simple to navigate operating system.

It is designed to speed up testing with has a fast purging system and allows fuel selection during startup to prevent time wastage. It'll also remember the last fuel you used automatically and up to ten fuels can be selected: natural gas, LPG, light oil, heavy oil, bituminous coal, anthracite coal, coke, butane, wood and bagasse

The standard kit comes complete with the TPI 709R Flue Gas Combustion Analyser in a protective rubber boot, temperature sampling probe c/w external large water trap and unique in-lid water trap, soft carry case with shoulder strap, rechargeable battery pack & charger, pressure adaptors, ambient air probe, spare particle filter and instruction manual.

TPI 709R Flue Gas Combustion Analyser features:

Measure CO, O2 & Flue Temperature
Calculate CO2, CO/CO2 Ratio, Efficiency & Excess Air
Dual Input Differential Manometer – Great for performing Standing Pressure or Let By/Tightness Tests
Dual Input Differential Thermometer – Ideal for measuring & recording Flow & Return Temperatures
Ambient CO Analysis
Diagnostic software & technical helpline combine to save time and money on reduced downtime as many of the reported faults can be rectified over the phone keeping you and your instrument working
Unique external water trap filtration system as standard on all kit options preventing loss of downtime or additional costs due to potentially damaged sensors caused by water ingress
10 Fuel options including Wood, Light & Heavy Oil, LPG and Natural Gas
Will not shut off if CO ppm is above 15ppm for increased safety for both the user and the instrument
Unique in-line pump protection filter fitted as standard across all kits preventing loss of downtime or additional costs due to a potentially damaged pump caused by dust/dirt ingress
Protective rubber boot as standard to protect the FGA
Re-Chargeable battery housed in a separate compartment ensuring no heat transfer when using on the mains to affect gas readings
All kits come supplied in a soft carry case to protect not only the FGA but all of your accessories
Capability of sending Live or Stored readings to an optional IR Printer

The TPI 709R Flue Gas Combustion Analyser comes complete with the following standard accessories:

TPI 709R Instrument
Rubber Boot
Battery Charger
Soft Carrying Case
Flue Sampling Probe
In-Line Filter assembly installed on Flue probe
Temperature Probe
Mini Pump Protection Filter Assembly and spare filters
Exhaust Spigot (removable)
Instruction Manual

Options available:

Infrared printer (A740)
Spare In-Line Filter (A794F is a package of 5 filters)

TPI 709R Flue Gas Combustion Analyser Specifications
Instrument
Operating Temperature Range	14°F to +122°F (-10°C to +50°C)
Battery / Battery Life	Rechargeable Ni-MH / > 6 Hours
Charger Input Voltage	115V or 230V: 50/60 Hz AC
Fuels	Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
Pressure Ranges	mbar, kPa & inH2O
Display	Backlit Graphic LCD
Data Storage	50 sets of readings, multiple pages
Time and Date	24-Hour Real-Time Clock
Dimensions	7.8” (200mm) x 3.5” (90mm) x 2.4” (60mm)
Weight	500g
Casing	Rubber Boot as Standard
Switch Off	Failsafe
Exhaust	Safety Spigot
Conforms to	EN50379

Flue Temperature Probe
Construction	Pistol Grip with Stainless Steel Shaft
Hose Length	8.2’ (2500mm)
Insertion Length	7.9” (200mm)
'K' Type Thermocouple Accuracy	+/- 0.3% of full-scale, +/- 2°F (1°C)
Maximum Temperature	1472°F (800°C)

Gases	Range	Resolution	Accuracy
Oxygen	0-25%	0.1%	+/- 0.3%
Carbon Monoxide	0-10,000 ppm	1 ppm	(<20ppm) +/- 3 ppm (>=100ppm) +/- 5%
Carbon Dioxide (calculated	0-25%	0.1%	Calculated
CO/CO2 Ratio	0-0.999	0.001	+/- 0.3%
Combustion Efficiency	0-100%	0.1%