Martindale HPAT400 HandyPAT Tester

Martindale HPAT400 HandyPAT Tester

Martindale HPAT600/2 HandyPAT Tester Close up

Martindale HPAT600/2 HandyPAT Tester

Martindale HPAT500/2 HandyPAT Tester

£538.80 £449.00
Availability: In stock
SKU
Martindale HPAT500/2 HandyPAT Tester
  • Compact design with backlit display
  • Easy one button testing
  • Automatic Class I, Class II & power lead tests
  • Measured values with clear PASS/FAIL indication
  • 200mA earth bond test – I.T. Safe
  • 250V / 500V insulation test
  • Mains rechargeable

Martindale HPAT500/2 Rechargeable PAT Tester

The HPAT500/2 HandyPAT is an easy to use hand held lightweight portable PAT tester with simple one-button test selection. The tester comes with rechargeable batteries and mains charger for low cost of ownership and can be used whilst recharging ensuring no downtime.

A single button press activates either a full Class I, Class II or lead test without any further interaction, unless a failure is encountered. The display clearly shows PASS / FAIL and all test results on screen. Simple connection diagrams are permanently shown on the case body.

 

  • Simple one button testing
  • Automatic Class I, Class II & power lead test
  • Displays measured values with PASS/FAIL indication
  • T. safe 200mA DC earth bond test with two pass levels
  • Selectable 250V / 500V insulation test
  • Tests both 240V and 110V appliances
  • Mains rechargeable with in-car option

Specifications

Earth continuity

Test current: 200mA DC

Range: 0-19.99Ω

Resolution: 0.01Ω

Accuracy: ± (5% rdg + 2 dgt)

Fixed pass limits: ≤ 0.10Ω/≤ 0.20Ω

Insulation

Test Voltage: 250V/500V DC selectable

Test current: 1.5mA

Ranges: 2.00MΩ, 20.0MΩ, 200MΩ

Resolution: 0.01MΩ

Accuracy: <100MΩ ± (5% rdg + 2 dgt), >100MΩ ± (10% rdg + 2 dgt)

Default pass level

Lead: ≥ 1.0 MΩ

Class I: ≥ 1.0 MΩ

Class II: ≥ 2.0 MΩ

Fuse test

Voltage: 4V DC (open circuit)

Current: 200mA DC (short circuit)

Pass level: >2mA

Overload protection

300V AC/DC

Complies with

BS EN 61010

Temperature range

-10 to 40°C

Supply

6 x 1.2V AA NiMH rechargeable batteries 1800mAh

Dimensions

90 x 210 x 54mm

Weight

700g (inc batteries & leads)

Includes

TC57 carry case, PSUHPAT230 mains charger, rechargeable batteries, EX332 IEC lead, TL67 earth bond probe and manual

Included

  • extension lead adaptor
  • earth bond probe with clip
  • mains charger
  • 6xAA rechargeable batteries
  • “Test & Go” carry case with separate pocket for accessories.

A comprehensive range of optional adaptor leads are available enabling 110V appliance testing and testing of equipment terminated with 3 phase plugs.

HPAT500/2 PAT tester comes complete with a Calibration Certificate Traceable to National Standards when purchased new.

Contact us for further information regarding HPAT500/2 PAT tester.

Write Your Own Review
You're reviewing:Martindale HPAT500/2 HandyPAT Tester
Your Rating

Our Best Selling Products