Megger MFT1741 Multifunction Tester

The Megger MFT1741 Multifunction Tester is for testing low voltage electrical installations to BS7671.  It provides all the tests required insulation, continuity, loop impedance and RCD tests to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. 

Megger MFT1741 Multifunction Tester has the “Confidence Meter” technology and is ideal for enhanced Earth loop Impedance testing in electrically noisy environments. Traditional Loop Impedance methods are susceptible to circuit noise during the measurement phase.  If the AC waveform changes during this period, from noise or harmonics, the distortion can create significant variation from test to test.

The “Confidence Meter” analyse and adjusts for these variations and provides a far more sable result every time, removing the need for repeated tests.  In addition, it also supports a new measurement technique, removing the influence of any RCD or RCBO on the measured loop impedance value.

It is quick to pick up and use, the controls are colour coded to make range selection easy and fast.  It also reduced the chance of using the wrong function or range.  The large crystal-clear backlit display uses the patented Megger digital/analogue arc, providing indication of fluctuating readings while the dual digital readout shows precise values of key measurements simultaneously with the test parameters, such as the output voltage on insulation testing as well as the resistance value in MΩ.

Visible and audible safety warnings are paramount when testing high energy systems and the Megger MFT1741 Multifunction Tester includes full input protection and safety warnings when hazardous voltage is present.

Designed for tough environments and ultimate reliability with rubber over mould for extra protection and grip, IP54 protection against dust and water and CATIV safety rating.

The Megger MFT1741 Multifunction Tester uses internally rechargeable batteries and charger.  With a charge time of less than 4 hours and the ability to store results in the internal memory and by using Bluetooth® communications for downloading test results using Megger Download Manager (supplied)

Megger MFT1741 Multifunction Tester features: 

• Insulation (100, 250V, 500V and 1000V)
• Continuity 200 mA and 15 mA
• Loop
• 2 and 3 wire non-trip L-PE 50V-280V
• 2 wire Hi current L-N 50V-280V
• 2 wire phase to phase L-L 50V-500V
• PSCC and PFC (20kA max)
• Max Zs
• Touch voltage display on faulty earth
• RCD
• 1/2, 1, 5 x I and ramp
• Auto Test
• Type AC, A, S and programmable
• Type B (pure DC)
• 10, 30, 100, 300,500 and 1000mA RCD
• Supply measure
• True RMS
• Phase rotation
• Rechargeable batteries (charger included)
• On board memory with Bluetooth® download
• CAT IV 300V / CATIII 600V
• Large soft pouch with plenty of additional space for optional extras
• Confidence meter noise reduction
• New hardware loop test platform

Megger MFT1741 Multifunction Tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.

Contact us for further information regarding Megger MFT1741 Multifunction Tester