Signatrol SL61T miniature temperature data logger
£96.00
£80.00
Availability:
In stock
SKU
Signatrol SL61T
Signatrol SL61T miniature temperature data logger that measures from -20°C to +70°C (-4°F to +158°F) with an accuracy of ±0.5°C / ±0.9°F. Compared to the SL50 series data loggers, all dLog data loggers have a larger memory, improved accuracy, non-volatile memory, so the data can be downloaded should the battery be depleted and a remaining battery life indicator.
All dLog data loggers communicate with the USB-powered NFC reader. The same reader can be used with all members of the dLog family.
The SL61T is the lowest-cost member of the dLog data logger series.
Signatrol SL61T data logger comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Signatrol SL61T data logger.
DESCRIPTION
The SL61T can be programmed to take readings from once per minute to once every 24 hours. The data loggers can be programmed to start logging immediately, on a specific time and date, if the measured temperature goes above or below preprogrammed limits or even, after specific time period and also above or below preprogrammed temperature limits.
APPLICATION EXAMPLES
- Fridge & Freezer Monitoring
- Goods In Transit
- Museums
- Environmental Monitoring
- Facilities Management
The SL61T is a self-contained, multiple use, small temperature data logger with the ability to record up to 2,100 temperatures over the temperature range of -20°C to +70°C with an accuracy of ±0.5°C.
Being only 22mm in diameter and 11mm thick, the SL61T is an incredibly small temperature data logger, ideal for use in confined spaces.
The memory can hold up to 2,100 readings and can be cleared at the start of each data logging session, allowing the data logger to be reused over and over.
*The SL60 NFC USB Interface lead and software are not included with this temperature data logger.
SPECIFICATION
| Power: | Internal Battery |
| Battery Life: | Typically 2 years. Remaining battery life is shown within the TempIT5 software |
| Battery Type: | Panasonic BR1632A (non replaceable / non rechargeable) |
| Measuring Range: | -20°C to +70°C (-4°F to +158°F) |
| SL61T Accuracy: | ±0.5°C (±0.9°F) |
| SL61T-A Accuracy: | ±0.25°C ±0.1% of Calibrated Span (±0.45°F ±0.1% of Calibrated Span) |
| Resolution: | 0.2°C (0.36°F) |
| Sample Rate: | 1 minute to 24 Hours |
| Maximum Number of Readings Stored: | 2100 |
| Memory Limit: | Yes, programmable total number of readings can be set |
| Reusable When Memory Full: | Yes |
| Download Speed: | Approximately 30 seconds. |
| Weight: | Approximately 6g |
| Response Time: | 63% step change - 90 seconds in circulating air. 10% to 90% step change - 180 seconds in circulating air |
| Waterproofing: | IP30 - Protected against solid foreign objects of 2.5mm dia and greater. |
| No water ingress protection | |
| please see the SL62T / SL62T-A if the data logger is to be submerged in liquid | |
| Delayed Start: | Yes, you can specify a time and date to start logging up to 365 days in advance with one minute resolution |
| Triggered Start: | Yes, the data logger be set to start logging when the temperature goes above or below specified values |
| Software Alarms: | Yes, high and low alarms can be specified in the software |
| Food Safe Construction: | No. For food safe construction, see SL62T or SL63T |
| Material: | Nylon 66 + 33% Glass Fibre |
| Dimensions: | 22mm diameter x 11mm high |
| Warranty: | 1 Year |
| Approvals / Standards: | EN 12830 |
Signatrol SL61T data logger comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Signatrol SL61T data logger.
Signatrol dLog SL60 series_Instruction_Sheet.pdfWrite Your Own Review
