Tietzsch ΩMegasafe ISO1Ex

Tietzsch ΩMegasafe ISO1Ex

Tietzsch DSP4

was £165.00 Special Price £155.00
In stock
SKU
Tietzsch DSP4
The Tietzsch MultiSafe DSP 4 is a two-pole voltage tester with digital display & is provided with continuity & phase tester, polarity tester & phase sequence indicator.

 

The Tietzsch MultiSafe DSP 4 is a two-pole voltage tester with digital display. It complies with DIN EN 61243-3 (VDE 0682 part 401) and is provided with continuity and phase tester, polarity tester and phase sequence indicator. With this device you can determine the existence and the strength of AC and DC voltages within a range of 24 V to 1000 V at frequencies up to 4 kHz.
With the integrated continuity tester you can also measure resistances within a range of 0 to1999 kΩ. Voltage and resistance values appear in digital format on the display. Additionally, three LEDs indicate voltage and rotating field as well as one LED and one sound generator continuity. Due to its high protection category IP 65 the MultiSafe can be used in precipitation.
 

Key Features
  • Nominal voltage range:
  • 24* ... 1000 V AC/1500 V DC
    *Auto on from 24 V
  • Overvoltage range
  • (exceeds the limit values in accordance with IEC 61243-3):
    > 1000 V AC ... 1200 V AC
  • Nominal frequency range:
  • 0 ... 500 Hz
  • Extended frequency range
    (exceeds the limit values in accordance with IEC 61243-3):
  • 15 Hz ... 10 kHz < 500 V,
    15 Hz ... 4 kHz > 500 V
  • Input resistance:
  • approx. 320 k. AC
    approx. 710 k. DC
  • Current (Peak value Is):
  • 3,2 mA at 1000 V AC
    1,4 mA at 1000 V DC
  • On-period:
  • 2 minutes
  • Display:
  • 4 LEDs for voltage, continuity, & phase sequence
    LCD digital display 7-segment-figure,
    2 lines 0 ... 1999 digit backlight 3 measurments/s
  • Power supply:
  • 9 V block battery
    IEC 6LR61 (alkali-manganese), multi-stage display of battery status
  • Surge voltage category:
  • CAT IV 600 V
    CAT III 1000 V
  • Impulse withstand voltage:
  • > 12 kV (1,2/50 µs)
  • Test voltage:
  • 6 kV
  • EMV-requirements:
  • DIN-EN 61326
  • Operating temperature:
  • -15…+45°C
  • Casing:
  • impact-resistant, dustproof plastic casing with unbreakable display cover
  • Protection category:
  • IP65
  • Connecting line:
  • PUR hose cable 1000 V, 1m
  • Dimensions:
  • test electrode with display, 240 x 62 x 39 mm
  • Weight:
  • 270 g (incl. battery)

 

As Tietzsch UK Distributor we supply a Free Calibration Certificate Traceable to National Standards
More Information
Brand Tietzsch
Write Your Own Review
You're reviewing:Tietzsch DSP4
Your Rating

Our Best Selling Products