Calibration & Repairs
What do you as a customer need and expect from a calibration house? You might be an electrician with 17th Edition test equipment, who suddenly realises the NICEIC inspector is due next week, and your instruments are not calibrated. In your company perhaps you have an infrared thermometer, a Marconi radio test set, a fibre-optic power meter, or even a microwave leak detector. Where do you go to get your instrument calibrated with a certificate of calibration to show that your instrument is fully functional to manufacturers’ specifications, and at a reasonable price? Well, the old yellow pages are restricted to your local telephone area, and may not have a suitable calibration house listed that can calibrate your instrument. The modern method these days is to use the internet, and, searching for “calibration prices” on a search engine such as “Google” is perhaps a good start to finding what you need. Prices and quality of service vary and can sometimes be misleading in what you get for your money. Ideally you should choose a calibration house that uses high quality calibrators, is an ISO9001:2008 registered company with set quality procedures, offers a good service at a reasonable price, and will look after you when you are in trouble. Of course you will have your favourite calibration house you have always been with, just because you didn’t know where else to go, and why should you. But as you would expect, this article aims to show you why this calibration house at Glanford Electronics, has all the qualities to fulfil your needs.
Most calibration houses try to achieve a high accuracy in calibrating customer’s instruments. Much depends on the type of instrument as to what accuracy is actually achievable. A simple thermometer which has a manufacturer’s stated accuracy of ±2µ is in itself a standard item, whereas ±0.1µ is much better. High accuracy calibrators and associated equipment make all the difference as to the quality and final statement of uncertainty on a certificate of calibration. The “statement of uncertainty” is the combination of the accuracy factors of all the items used in calibrating customers instruments. Although most calibrators are manufactured to high standards, good quality calibrators can take on board an external frequency standard to improve their accuracy and stability even further. The well known off air standard broadcast from the 198 kHz BBC Radio 4 transmitters at Droitwich has been used for years to this end. Apart from calibrating test instruments, at Glanford Electronics we need high accuracy in the mobile radio sphere, where radio calibrators need to be really accurate. To achieve this we have installed a multi-output Rubidium Frequency Standard with an accuracy of parts 10-13. This allows us to bring simultaneously a number of calibrators up to this higher standard with our GPS10RBN from Precision Test Systems. The GPS10RBN is a 10 MHz GPS disciplined rubidium frequency standard. It combines the short term stability of an atomic rubidium oscillator with the long term stability and traceability of the Global Positioning Service set of satellites. The GPS10RBN achieves short and long term frequency accuracy of parts in 10-13. Thus the GPS10RBN exceeds the requirements of a Stratum 1 level frequency standard.
As you can imagine, covering the wide range of instruments and equipment, we have a comprehensive range of calibrators including:
- Fluke 5700A with Fluke 5725A amplifier recognised to be the most accurate calibrator available which is capable of calibrations on 8½ digit Multimeters.
- Fluke 5500 calibrator covering frequency and temperature in addition to Amps, Ohms and Volts.
- Transmille 2100 for accurate calibrations on 17th edition electrical equipment such as PAT Testers, Loop Impedance testers and Insulation & continuity testers.
- Ametek Black Body Heat Source for the calibration of infrared type Thermometers.
- Ametek Am12082 precision measuring system. with platinum probe at 0.001µ resolution
- We can generate and read up to 20GHz ideal for Spectrum analysers and various RF equipment
- Calibration of data transmission test sets, and bit error rate test sets, or BERT testers
All calibrations include certification traceable to National Standards/a UKAS calibrated test instrument, in accordance with our ISO9001:2008 Registration and to the requirements of BS EN ISO 10012:2003. We can offer full Calibration of equipment with Certification, as clients Quality Assurance systems require. So what is ISO9001. Put simply ISO 9000 is a family of standards for quality management systems. ISO 9000 is maintained by the International Organization for Standardization and is administered by accreditation and certification bodies. Some of the requirements in ISO 9001 include:
- A set of procedures that cover all key processes in the business.
- Monitoring processes to ensure they are effective.
- Keeping adequate records;
- Checking output for defects, with appropriate and corrective action where necessary.
- Regularly reviewing individual processes and the quality system itself for effectiveness.
- Facilitating continual improvement
As our company is an ISO9001:2008 registered firm, we are proud of our Quality assurance systems and employ a director responsible for Quality. Our Quality Manual is available for inspection and we welcome visits by Quality Assurance staff to our workshops. This ensures that your test equipment is identified and checked at each stage, from booking in to final inspection, leaving with a fully traceable certificate of calibration.
We have a competitive calibration price structure to include a wide range of instruments, some of which we have listed. Check out our calibration prices listed on our calibration price list.
A large range of spare parts are held on stock and our turn around time is 3 days unless a specialist spare part is required. Equipment is collected and delivered via our own transport within our catchment area. Our workshop and calibrators are open for any inspection. Staff operating in these areas of the Company have many years of experience in instrumentation.
Tata Steel, North Lincolnshire Council, Anglian Water, Smith & Nephew and Yorkshire television are just a few of the companies who rely on Glanford Electronics for test equipment repair and calibration facilities.
Don’t forget to check our calibration prices. Why don’t you give us a try, you will be pleased you did!
All calibrations include certification traceable to National Standards/a UKAS calibrated test instrument, in accordance with our ISO9001:2008 Registration and to the requirements of BS EN ISO 10012:2003. We can offer full Calibration of equipment with Certification as clients Quality Assurance systems require.