Testo 410-1 Vane Anemometer

Product Description

With its handy format, our testo 410-1 vane anemometer is extremely practical for fast check measurements at ventilation grilles and outdoors. With the permanently installed vane (diameter 30 mm), you can even measure low air velocities from 0.4 m/s to 20 m/s.
The anemometer is equipped with our Testo NTC temperature sensor with a measuring range of -10 to +50 °C for inspecting the air conditions. You can therefore use this to measure air temperature reliably. The testo 410-1 displays other parameters at the touch of a button.

The anemometer offers practical accessories and useful functions

Testo have equipped the vane anemometer with a clip-on protective cap. This offers reliable protection if you are not using the testo 410-1 straight away. During the measurement you can use the fitted wrist strap, which prevents the vane anemometer from falling.

Take a look at the useful functions offered by the anemometer:

• Single-point averaging:calculation of the mean air velocity, for example at ventilation grilles (air outlets)
• Hold function:enables the current measurement data relating to air velocity, humidity and air temperature to be recorded and compared with each other
• Max/min values: displays the minimum or maximum values since the vane anemometer was last switched on or reset
• Illuminated display:read off your readings quickly and easily, even if visibility is poor
• Selectable units:air velocity: m/s, km/h, fpm, mph, kts, air temperature: °C, °F

Technical Data

What’s Included:

• testo 410-1 vane anemometer
• protective cap
• wrist strap
• calibration protocol
• batteries

Testo 410-1 vane anemometer comes complete with a calibration Certificate Traceable to National Standards/UKAS Test Equipment, when purchased from us, at no extra charge. 

Contact us for further information regarding Testo 410-1 vane anemometer