Tietzsch Multisafe DSP 5 Voltage Tester
£276.00
£230.00
Availability:
In stock
SKU
84501
Article number: 84501
The Tietzsch MultiSafe DSP 5 is a very versatile voltage tester for all areas of industry and power engineering.
- nominal voltage range:
0,80 − 1200 V AC / 0,00 − 1500 V DC - display range with activated load up to 1200 V DC
- continuity tester with measurement 0,01 − 1000 kOhm
- overvoltage category: CAT IV 1000 V
- measuring point lighting
- phase sequence test without earth for IT networks
- additional load for interference voltages and RCD−tripping
Tietzsch Multisafe DSP 5 voltage tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Tietzsch Multisafe DSP 5 voltage tester.
Tietzsch MultiSafe DSP 5
With certified CAT IV – 1000 V, it meets the highest safety requirements. The precise two-colour display and the wide voltage range allow it to be used almost anywhere...
Due to its extensive equipment with additional load, continuity test, measuring point illumination and phase sequence test, all functions are combined in the voltage tester.
The voltage tester has a unique safety concept. Tested and certified by VDE, it not only meets the requirements of EN 61243-3 “Voltage testers” but exceeds them. In addition, the voltage tester monitors and protects safety module monitors and protects the DSP 5 and guarantees the highest level of protection for the user.
Voltage tester:
- precise display of the voltage 0,3 V bis 1200 V AC / 0,01 to 1500 V DC
- extended test range for low and battery voltages 0,01 to 19,99 V DC
- extremely voltage resistant – CAT IV 1000 V – VDE certified
- large two-colour illuminated display (red/white), for clear warning of hazardous voltages
- clear LED indication for hazardous voltage
- additional load for interference voltages and RCD-tripping
- hold the measured value with the HOLD button
Continuity tester:
- quick continuity test with sound
- accurate resistance measurement in the range 0,01 kOhm to 1000 kOhm
- green LED for continuity
Phase and phase sequence tester:
- phase tester with display “POL” and red LED
- phase sequence tester with LCD and LED display right / left
- controller-monitored testing with error detection to avoid false statements
- additional phase sequence tester without earth for IT networks
Further functions:
- measuring point lighting
- slim test electrodes for narrow clamping strips
- one-handed operation when testing sockets
- easy handling
- insulation fault detection through two-colour line insulation
- extremely stable housing, even in cold conditions
- IP 65 – waterproof
- with belt clip on the back
Specifications:
|
Tietzsch DSP 5 |
|
|
Nominal voltage |
12 - 1000 V AC |
|
12 - 1500 V DC |
|
|
Display range |
0,15 - 1200 V AC |
|
0,03 - 1500 V DC |
|
|
Resistance measurement |
0,01 - 1000 kOhm |
|
Continuity tester with sound |
yes |
|
Frequency range |
DC / 15 - 10 000 Hz |
|
Single-pole phase test (phase) |
yes |
|
Phase sequence tester |
yes |
|
Phase sequence tester for IT network without ground reference |
yes |
|
Power supply |
2 x 1,5 V AA |
|
Overvoltage category |
CAT IV 1000 V |
|
according to IEC 60664-1 (VDE 0110) |
|
|
Degree of protection |
IP 65 |
|
VDE GS approval according to IEC 61243-3 |
yes |
|
Measuring point lighting |
yes |
|
Switchable load and 30 mA RCD-tripping |
yes |
|
Adjustable electrode length 4 or 15 mm |
no |
|
Art.-no. |
84501 |
|
Product dimensions and weight |
275 x 89 x 35 mm |
|
(handgrip and display unit) |
|
|
275 x 60 x 35 mm |
|
|
(display unit) |
|
|
270 g |
|
|
Product packaged dimensions and weight |
315 x 105 x 60 mm |
|
425 g |
|
Tietzsch Multisafe DSP 5 voltage tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Tietzsch Multisafe DSP 5 voltage tester.
Tietzsch_dsp_5_datasheet (1).pdfWrite Your Own Review
