Crystal Engineering XP2i Digital Pressure Gauge

Be the first to review this product

As low as £1,641.60 £1,368.00

Availability: In stock

Only %1 left

SKU

Crystal Engineering XP2i

Crystal Engineering XP2i Digital Pressure Gauge Atex Intrinsically Safe Digital Pressure Gauge. The Crystal Engineering XP2i Digital Pressure Gauge comes in two basic versions, a plain pressure gauge, or a datalogging pressure gauge. Measuring scales include, PSI, bar, kPa, and Absolute Pressure. There are other versions in the series. If you do not see the item you require, please contact us for further information.

Crystal Engineering XP2i Digital Pressure Gauge comes complete with a Free Calibration Certificate Traceable to National Standards when purchased new.

Product Description

Crystal Engineering XP2i Digital Pressure Gauge

ATEX approved pressure gauges are a must for explosive atmospheres. The Crystal Engineering XP2i Digital Pressure Gauge meets the ATEX approval requirements, is very rugged and water resistant to IP66 and IP67.

The case and sensor are made of stainless steel to provide resistance to corrosion as well as an excellent barrier to emissions from electrically noisy equipment with a replaceable filter in the sensor to keep out debris.

Crystal Engineering XP2i Digital Pressure Gauge have the ability to survive large over-pressure events with no change in calibration.

The Crystal Engineering XP2i Digital Pressure Gauge is very easy to use. No menus - just buttons. They can be calibrated via the keypad or the RS232 port. It is very accurate and is rated in percent of reading. They are not affected by ambient temperature, and are fully temperature compensated, so the accuracy is the same over the entire operating temperature range.

The Crystal Engineering XP2i Digital Pressure Gauge comes in two basic versions, a plain pressure gauge, or a datalogging pressure gauge. Measuring scales include, PSI, bar, kPa, and Absolute Pressure.

Features
ATEX II 1G Ex ia IIC T4/T3 Ga FTZU 12 ATEX 0048X Rugged digital test gauge with 0.1% of reading accuracy Accuracy not affected from -10 to 50°C Easy to use Marine grade enclosure resists corrosion Can replaces 5 or more digital test gauges Fast pressure safety valve (PSV) mode Custom pressure units can be defined With the optional DataLogger XP upgrade: Record 32 000 data points Battery-optimizing, Ultra Low Power (ULP) Mode Over an entire year of continuous recording time Now available on the Dual-Line Display XP2i Applications Field gauge calibration Permanent outdoor installation Pressure safety valve (PSV) testing Torque datalogging Pressure regulator testing Pipeline static pressure testing Chart recorder replacement Filter performance testing Hydrostatic leak testing
Specifications
Accuracy
0 to 20% of range:	±(0.02% of Full Scale)
20% to 100% of range:	±(0.1% of Reading)
Vacuum:	±(0.25% of Full Scale*)
	* Full Scale = -14.5 PSIG
OperatingTemperature
Temperature range:	-10°C to 50°C (14°F to 122°F)
Display
Screen:	5 digits, 16.5 mm (0.65") high
Display Rate:	3 readings/second (standard) 7 readings/second (PSV mode)
Power
3 x AA:	1500 hours, typical
Data Communiction
Digital Interface:	RS232, DB-9F
DataLogging

Enclosure
Weight:	562 g (19.8 oz)
Rating:	IP66 and IP67
Housing:	Diecast aluminum
Keypad and labels:	UV Resistant Polyester

Crystal Engineering XP2i Digital Pressure Gauge comes complete with a Free Calibration Certificate Traceable to National Standards when purchased new.

Datasheets