Fluke i400s AC Current Clamp
£404.40
£337.00
Availability:
In stock
SKU
2277202
Fluke i400s AC Current Clamp
Article Number: 2277202
Fluke i400s clamp extends the current ranges of digital multimeters, power quality analysers, and portable oscilloscopes. The i400s is specially designed for maximum utility in a compact shape and is safety rated with CAT IV 600 V / CAT III 1000V
Free of charge calibration and certification with purchase of new Fluke i400s AC current clamp.
Contact us if you require any further assistance with any Fluke product.
Fluke i400s AC Current Clamp
Fluke i400s clamp extends the current ranges of digital multimeters, power quality analysers, and portable oscilloscopes. The i400s is specially designed for maximum utility in a compact shape and is safety rated with CAT IV 600 V / CAT III 1000V
Key features
- Companion to your scope or power quality meter to measure up to 400 A AC
- Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
- Specially designed to offer maximum utility in a compact shape
- Take accurate current readings without breaking the circuit
- Soft non-slippery overmold handle
- Optional PM9081/001 BNC/Banana adapter for DMM's
- Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
- Max. conductor Ø 32 mm
Specification
|
Nominal current range |
40 A range |
0.5 A to 40 A |
|
400 A range |
5 A to 400 A |
|
|
Basic accuracy |
40 A range |
2% + 0.15 A (45-400 Hz) |
|
400 A range |
2% + 0.04 A (45-400 Hz) |
|
|
Phase shift |
40 A range |
|
|
0.5 A to 1 A |
Unspecified |
|
|
1 A to 5 A |
4° |
|
|
5 A to 10 A |
3° |
|
|
10 A to 20 A |
3° |
|
|
20 A to 40 A |
2° |
|
|
40 A to 400 A |
N/A |
|
|
400 A range |
||
|
0.5 A to 1 A |
N/A |
|
|
1 A to 5 A |
N/A |
|
|
5 A to 10 A |
Unspecified |
|
|
10 A to 20 A |
2° |
|
|
20 A to 40 A |
2° |
|
|
40 A to 400 A |
1.5° |
|
|
Typical Bandwidth |
40 A range |
5 Hz – 10 kHz |
|
400 A range |
5 Hz – 10 kHz |
|
|
Output level(s) |
40 A range |
10 mV/A |
|
400 A range |
1 mV/A |
|
|
Crest factor |
40 A range |
≤ 3 to 300 A |
|
400 A range |
≤ 2.5 to 400 A |
|
|
Safety |
CAT IV 600V, CAT III 1000V |
|
|
Maximum non-destructive current |
1000 V AC |
|
|
Warranty |
1 year |
|
|
Maximum conductor size |
32 mm (1.25 in) |
|
|
Output cable length |
2.5 m (8.2 ft) |
|
|
BNC adapter |
Yes |
|
|
Dimensions |
150mm x 70mm x 30mm |
|
|
Weight |
114 g |
|
Free of charge calibration and certification with purchase of new Fluke i400s AC current clamp.
Contact us if you require any further assistance with any Fluke product.
PDF Files
Fluke i400s AC Clamp instructions.pdfWrite Your Own Review
Our Best Selling Products
