We supply a free of charge traceable calibration and certification with the purchase of a Hanna HI-935004P T-type thermocouple thermometer.
Contact us if you require any assistance with your choice of any Hanna Instruments or accessories.
HI-935004P is a thermometer that includes a T-type thermocouple stainless steel replaceable style penetration probe (FC767PW). This thermometer offers temperature measurement from -50°C to +300°C.
Standard features include waterproof casing and stainless-steel penetration probe for measurements in semi-solid food, liquids or pastes.
Hanna's exclusive Cal Check, saves time and brings peace of mind to users in busy catering environments. In hot kitchens, fast production lines and hectic retail environments, few operators have the time to keep checking the accuracy of their meters.
Hanna Cal Check automatically verifies the thermometer circuit accuracy at 0.0°C every time it is switched on. During start up, the calibration of the thermometers circuit is checked and the result is briefly displayed on the thermometers display to show the operator the calibration result.
Please note: The Cal Check system can only check the electronic circuit calibration and does not check the sensor of the thermometer. For further peace of mind, it is recommended to check the sensor by performing an ice test or comparative test against a reference thermometer.
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Waterproof casing and optional shockproof rubber boot offer maximum protection for a durable thermometer than can handle any environment.
Made to fit comfortably in your hand for on-the-go testing, the large LCD display provides at-a-glance readings from any angle.
With single button operation, temperature measurements could not be simpler. This single button turns the meter on and off and allows you to cycle through options when in Setup Mode.
The HI-935004P works with a wide range of thermistor probes with T-type connection, including an assortment of specially engineered HI-767 probes, so you can get the right probe for your needs.
Supplied with the FC767PW
The FC767PW is a rugged penetration probe designed for general use. The stainless-steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in the food sector.
Thermometer: |
|
T-Type Thermocouple Temperature Range |
-50.0°C to +199.9°C; +200°C to +300°C |
T-Type Thermocouple Temperature Resolution |
0.1°C (up to +199.9°C) / 1°C (outside) |
T-Type Thermocouple Temperature Accuracy |
±0.4°C (-50.0°C to +300°C) |
Thermometer Probe |
FC767PW penetration, T-type thermocouple probe w/1 m (3.3’) white cable & white handle |
General meter: |
|
Automatic Shut-Off |
User selectable: 8 min, 60 min or disabled |
Battery Type / Life |
1.5V AAA (3) / approximately 3500 hours of continuous use |
Environment |
-20°C to +50°C (-4°F to +122°F); RH max 100% (Storage Temperature: -40°C to +70°C (-40°F to +158°F)) |
IP Rating |
IP65 |
Dimensions |
140 mm x 57 mm x 28 mm |
Weight |
178 g |
Warranty |
2 years (limited) |
We supply a free of charge traceable calibration and certification with the purchase of a Hanna HI-935004P T-type thermocouple thermometer.
Contact us if you require any assistance with your choice of any Hanna Instruments or accessories.