Food service, food preparation, packaging, storage and transport of food require temperature to be monitored or controlled. Spot checking temperatures with Hanna food thermometers ensures daily work routines are carried out at the correct temperature.
Designed with user functionality and performance in mind, the HI-93501 is a waterproof thermistor thermometer (probe included) that measures temperature from -50.0°C to +150.0°C (-58.0°F to +302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check™ and the Battery Error Prevention System (BEPS) ensure the highest level of accuracy and confidence.
We supply a free of charge traceable calibration and certification with the purchase of a Hanna HI-93501P thermistor thermometer.
Contact us if you require any assistance with your choice of any Hanna Instruments or accessories.
Hanna HI-93501 is a thermistor style thermometer that includes a stainless-steel replaceable style penetration probe (FC762PW). It measures temperatures from -50°C to +150°C.
Standard features include waterproof casing (rated IP65) and stainless-steel penetration probe designed for continuous contact with foodstuffs in accordance with regulations. HI-93501 also includes features such as CAL check, low battery detection, auto-off capability, and long battery life.
Hanna's exclusive Cal Check, saves time and brings peace of mind to users in busy catering environments. In hot kitchens, fast production lines and hectic retail environments, few operators have the time to keep checking the accuracy of their meters.
Hanna Cal Check automatically verifies the thermometer circuit accuracy at 0.0°C every time it is switched on. During start up, the calibration of the thermometers circuit is checked and the result is briefly displayed on the thermometers display to show the operator the calibration result.
Please note: The Cal Check system can only check the electronic circuit calibration and does not check the sensor of the thermometer. For further peace of mind, it is recommended to check the sensor by performing an ice test or comparative test against a reference thermometer.
The included AAA batteries provide 4500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Waterproof casing and optional shockproof rubber boot offer maximum protection for a durable thermometer than can handle any environment.
Made to fit comfortably in your hand for on-the-go testing, the large LCD display provides at-a-glance readings from any angle.
With single button operation, temperature measurements could not be simpler. This single button turns the meter on and off and allows you to cycle through options when in Setup Mode.
The HI-93501 works with a wide range of thermistor probes, including an assortment of specially engineered HI-762 probes, so you can get the right probe for your needs.
The FC762PW is a rugged penetration probe designed for general use. The stainless-steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in the food sector.
Range |
-50°C to +150°C |
|
Resolution |
0.1°C |
|
Accuracy |
+/-0.1°C |
|
Probe type |
HI-762PW probe (included) |
General meter: |
||
Automatic Shut-Off |
User selectable: 8 min, 60 min or disabled |
|
Battery Type / Life |
1.5V AAA (3) / approximately 3500 hours of continuous use |
|
Environment |
-20°C to +50°C (-4°F to +122°F); RH max 100% (Storage Temperature: -40°C to +70°C (-40°F to +158°F)) |
|
IP Rating |
IP65 |
|
Dimensions |
140 mm x 57 mm x 28 mm |
|
Weight |
178 g |
|
Warranty |
2 years (limited) |
We supply a free of charge traceable calibration and certification with the purchase of a Hanna HI-93501P thermistor thermometer.
Contact us if you require any assistance with your choice of any Hanna Instruments or accessories.