Kewtech KEWEVSE EV Adaptor

Kewtech KT66EVA

Kewtech KT66EVA MFT with KEWEVA Adaptor

Kewtech KEWEVA EVSA Testing Adapter

£358.80 £299.00
Availability: In stock
Kewtech KEWEVA EVSA Testing Adapter



The KEWEVA testing adapter is a EV charge point adapter that's simple and easy to use.

  • Enables testing of EV charge points
  • Single dial operation
  • Automatic CP check
  • Compact with no awkward adapter cable


The KEWEVA is for the testing of EV charging points that keeps things simple. The adapter is compatible with the KT66DL and all MFT’s using standard 4mm connections with EV capabilities.

The KEWEVA testing adapter works by simulating the presence of a car so the functionality of the EV supply equipment can be tested.

There is an in-built CP auto check which means one less thing to worry about and a lower resistance design ensures the highest quality loop measurements.

The KEWEVA couldn’t be easier to use with just a single rotary dial to control the CP status simulation: standby, ready & charging – so no confusing or unnecessary extras.

Uniquely there is no awkward cable to get tangled up with when testing!


  • No cables
  • A unique and compact new design that has done away with the awkward cable, making your life easier.


  • Just a single rotary dial to control the CP status simulation meaning no confusion or unnecessary extras.


  • Unique auto check of CP
  • Automatically checks for Control Pilot Errors so you don’t have to.



  • Enables testing of EV charging points
  • Works with any MFT with EV charging point testing capabilities
  • No awkward cable to negotiate when testing – plugs straight into the charging unit
  • Automatic single dial operation for ease of use
  • Direct low resistance connections for highly accurate results
  • Uses standard 4 mm connectors rated at 10 A for testing purposes
  • Suitable for single & three phase charging equipment
  • Supplied with durable carry case
  • Smallest in class
  • Red LEDs indicate live status per phase
  • Single rotary dial controls the CP status simulation: standby, ready & charging
  • Separate RED LED indicates when voltage is applied to output connectors
  • Auto check of 1 kHz control pilot signal - no oscilloscope required
  • Incorporates an IEC 62196-2 type 2 connector for EV charging units
  • LED indication of Phases
  • Type 2 male connector for EVSE connection
  • Carry Case
  • Manual
Input Voltage

Max 250V (single phase) 

Max 430V (three phase) 50/60 Hz

Measurement Category CAT II 300V
Double Insulated  
Safety EN 61010
EMC EN 61326
CP States Simulation A, B, C
Connector IEC 62196-2 Type 2 male
Working Temperature 0 to 40°C
Storage Temperature -10 to 50°C
Humidity 0 to 80% RH
Current Rating 10A Max
Write Your Own Review
You're reviewing:Kewtech KEWEVA EVSA Testing Adapter
Your Rating

Our Best Selling Products