Kewtech KT63DL Multifunction Tester
£747.60
£623.00
Availability:
In stock
SKU
Kewtech KT63DL Multifunction Tester
Kewtech KT63DL with new Anti-Trip Technology loop test – for full no trip loop testing on RCDs of all types. Low susceptibility of RCD uplift and noise interference.
- Small and compact
- Magnetic base for attachment to metal cabinets
- Tests all A Type RCDs
Kewtech KT63DL Multifunction tester comes complete with a calibration Certificate Traceable to National Standards/UKAS Test Equipment, when purchased from us, at no extra charge.
Contact us for further information regarding Kewtech KT63DL Multifunction tester
The KT63DL has a robust loop testing circuit, continuously guards against live circuits when dead testing and has an auto RCD test as standard. What’s more…this tester couldn’t be easier to use!
KEY BENEFITS
- Easy to use and straight forward interface with single rotary dial and large screen display
- Constant live voltage detection protects when dead testing
- No Bangs – continuous live monitoring means no blown fuses or PCBs
- Magnetic base for hands free attachment to metal cabinets
- Electronic 'hands free' lock down test button
- IP54 even when the leads are not plugged in
- End of line calibration certificate
- Comes complete with soft carry case, mains lead, distribution board leads and padded neck strap
KEY FEATURES
- Continuity - switchable buzzer and auto null
- Insulation - 250, 500 & 1000V with voltage warning LED and auto discharge
- Loop - ATT (low current), high current 0.01 ohm resolution
- Anti-Trip Technology loop for full no trip Loop testing of RCDs with low susceptibility of RCD uplift and noise interference
- PSC/PFC - clear indication of what is being tested and displayed with loop reading
- RCD - Type AC, A, ACS, AS, auto & ramp
- Type AC RCDs - Tests 10mA, 30mA, 100mA, 300mA & 500mA
- Type A RCDs - Tests 10mA, 30mA, 100mA & 300mA
- RCD auto test mode for 30 mA RCDs
- RCD ramp test function
- Test leads auto-null for continuity mode
- Polarity check
- Instant correct wiring status check
What’s Included
- ACC063 distribution board test lead set
- Kamp 12 mains lead
- Alkaline batteries
- Printed Instruction manual
- Soft carry case
Specification
|
Continuity |
|||||
|
Open circuit voltage (DC) |
Short Circiut Current |
Ranges (auto range) |
Accuracy |
|
|
|
> 4V, < 10V |
> 200mA |
9.99Ω, 99.9Ω, 1999Ω |
± 3% ± 2 digits |
|
|
|
Insulation |
|||||
|
Open circuit voltage (DC) |
Output current |
Ranges (auto range) |
Accuracy |
|
|
|
250V |
1mA - 0 = +20% @ 250 KΩ |
9.99MΩ, 99.9MΩ, 199MΩ |
± 3% ± 2 digits |
|
|
|
500V |
1mA - 0 = +20% @ 500 KΩ |
9.99MΩ, 99.9MΩ, 199MΩ |
± 3% ± 1 digits |
|
|
|
499MΩ |
± 6% ± 1 digits |
|
|||
|
1000V |
1mA - 0 = +20% @ 1 MΩ |
9.99MΩ, 99.9MΩ, 199MΩ |
± 3% ± 1 digits |
|
|
|
399MΩ |
± 3% ± 1 digits |
|
|||
|
999MΩ, 99.9MΩ |
± 6% ± 1 digits |
|
|||
|
Loop Impedance |
PSC/PFC |
||||
|
Range |
Accuracy |
PSC accuracy is derived from measured loop impedance specificaction and measured voltage specification |
|||
|
ATT No Trip 0.00 - 9.99Ω |
± 5% ± 5 digits |
||||
|
ATT No Trip 10.00 - 99.9Ω |
± 3% ± 3 digits |
||||
|
ATT No Trip 100 - 500Ω |
± 3% ± 3 digits |
||||
|
High Current 0.00 - 500Ω |
± 3% ± 3 digits |
Voltage Measurement ±3% 50/60Hz & 90-250V |
|||
|
RCD Type AC, ACS, A, AS |
|||||
|
Function |
Accuracy |
Rated Voltage |
Trip time Accuracy |
||
|
X ½ |
-0% to -10% |
195V - 253V AC 50Hz |
Up to 1 second |
± 1% ± 1 ms |
|
|
X 1 |
+0% to +10% |
Above 1 second |
± 1% ± 10 ms |
||
|
X 5 |
+0% to +10% |
|
|
||
|
Ramp test |
Increments in 3 mA Steps |
|
|
|
|
|
Auto test |
30mA RCD |
½ x 0°, ½ x 180°, 1 x 0°, 1 x 180°, 5 x 0°, 5 x 180° |
|||
Kewtech KT63DL Multifunction tester comes complete with a calibration Certificate Traceable to National Standards/UKAS Test Equipment, when purchased from us, at no extra charge.
Contact us for further information regarding Kewtech KT63DL Multifunction tester
Kewtech KT63DL Datasheet.pdfWrite Your Own Review
