Martindale VIPD138S Kit
£195.60
£163.00
Availability:
In stock
SKU
Martindale VIPD138S Kit
The Martindale VIPD138S kit includes the VI13800 voltage indicator and matching PD440S proving unit. Kits are supplied in the TC71 combination carry case
Comes complete with a calibration Certificate Traceable to National Standards when purchased new.
The Martindale VIPD138S kit includes the VI13800 voltage indicator and matching PD440S proving unit. Kits are supplied in the TC71 combination carry cases to ensure that proving devices are always at hand and provide the simplest solution for implementing safe isolation practices on-site in accordance the Electricity at Work Regulations. For convenience and to save time, the proving unit can be used without having to remove it from the case.
The VI13800 provides instant visual AC and DC voltage indication in four stages from 50V to 400V. The bright long life LED indicators give clear and immediate display of the voltage level range. It has retractable probes, heavy duty finger guards and a two-layer double insulated cable with a white inner core to give clear indication of damage that might compromise the user’s safety.
The Martindale PD440S is a 440V AC proving device designed to enable voltage indicators to be fully checked in compliance with Health & Safety recommendations. Using a voltage indicator without first proving it is working correctly could prove fatal.
The PD440S is compatible with the new Martindale VI13800 & the Martindale VI13700.
Suitable for all environments including 600V CAT IV, The VIPD138 kit is an essential safety aid for electricians, service and maintenance technicians.
Features:
- 50V-600V AC/DC
- Polarity & Voltage Indication 50V
- Heavy duty double insulated cable with contrasting inner core to reveal any damage
- Bright LED AC/DC voltage and polarity indication
- GS38 and BS EN61243-3 compliant
- 440V proving unit for all low and high impedance testers
VIPD138S Kit Includes
|
1 x |
Voltage indicator (VI13800) |
|
1 x |
Proving Device (PD440S) |
|
1 x |
Soft combination carry case (TC71) |
Specification: VI 13800
|
Nominal voltage range |
50V-600V DC/AC rms |
|
Nominal voltage threshold indications |
50V, 100V, 200V, 400V DC/AC rms |
|
Voltage threshold Tolerance |
Conforms to BS EN 61243-3 |
|
Polarity & voltage indication |
≥12V DC/AC rms |
|
AC/DC voltage detection |
automatic |
|
Range detection |
automatic |
|
Response time |
<0.1s |
|
Frequency range |
DC, 1-400 Hz |
|
Test current |
<3.5mA at 600V DC/AC rms |
|
Duty ratio |
30s On (operated) / 240s Off (recovery) |
|
Operating & storage temperature/humidity |
-10°C to +55°C, ≤85% R.H. |
|
Altitude |
Up to 2000m |
|
Power |
From circuit under test |
|
Dimensions |
(L) 205mm x (W) 67mm x (D) 27mm |
|
Weight |
130g approx. |
|
Safety |
Conforms to BS EN 61243-3 CAT IV 600V Class II, Double Insulation Pollution Degree 2 IP rating: IP54 |
|
EMC |
Conforms to BS EN 61326-1 |
Specification: PD440S
|
Output voltage |
440V nominal |
|
Output frequency |
50 Hz nominal |
|
Environmental |
|
|
Operating temperature |
-10°C to +40°C at max, 70% R.H. |
|
Altitude |
Up to 2000m |
|
Pollution |
Degree 2 |
|
General |
|
|
Internal batteries |
6 x 1.5V AA alkaline batteries (IEC LR6, NEDA 15A) |
|
Dimensions |
150mm x 80mm x 35mm |
|
Weight packed |
350g approx. with batteries |
|
Includes |
6 x 1.5V AA alkaline batteries, instructions |
Martindale VIPD138S kit comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding any Martindale products.
PDF Files
Martindale VIPD138S datasheet.pdfWrite Your Own Review
Our Best Selling Products
