The EP 4Ex is approved for use in EX II areas.
The MegaSafe EP 4Ex is a resistance measuring device for fast testing according to VDE 0413 of protective and grounding lines, equipotential bonding lines and lines at lightning arresters.
Comes complete with a calibration Certificate Traceable to National Standards when purchased new.
The EP 4Ex is approved for use in EX II areas.
The MegaSafe EP 4Ex is a resistance measuring device for fast testing according to VDE 0413 of protective and grounding lines, equipotential bonding lines and lines at lightning arresters.
Low resistance line tests
Universal and safe
Ep 4Ex for reliable and fast low resistance tests
Three readout systems
Test lines and batteries are in the delivery of the EP 4
Line and resistance measuring device EP 4Ex according to EN/IEC 61010-1 and EN/IEC 61557-4 (VDE 0413 part4) EP 4Ex according to DIN EN 60079-0 and 60079-11
EC Type examination certificate Ex II 2 G, Ex ib IIC T4, ATEX 552826
Measurement ranges: |
|
10 W (Lo-W) |
Resolution 0.01 W |
100, 2000 W |
Resolution 0.1…1 W |
20, 200, 2000 kW |
Resolution 0.01…. 1kW |
Accuracy |
1.5% rdg ± 4 digits at 20°C |
Measurement current: |
|
10 W (Lo-W) range |
200mA |
100 W range |
20mA |
Further ranges |
1uA….20mA |
Open -circuit voltage |
>4 Volt |
Measuring line balance |
Automatic 0-balance (CAL) up to 3.5 W |
Digital indication |
2-line LCD display, 3 ½ digit overflow indication via OL backlight |
Voltage Indication |
Red LED and acoustic warning signal as well as indication of value in Volt |
Overvoltage protection |
Up to 400 volts reversible via semiconductor, between 400 up to 500 volts via special fuse |
Overvoltage category |
CAT III 300V / CAT II 600V according to EN/IEC 61010-1 |
Operating temperature |
-10°C to 50°C |
Power supply |
Battery 9 V-Block AIMn IEC 6LR61 Multistage BAT-indication Automatic switch off |
Casing |
Made of impact resistant ABS with unbreakable display cover |
Protection category |
IP65, device can be used in moist environments |
Dimensions / weight |
60 x 230 x 40 mm / 220 g |
Tietzsch Distributor in the U.K
Glanford Electronics are Tietzsch test equipment distributors in the U.K.
Tietzsch MegaSafe EP 4Ex Earth resistance tester comes complete with a calibration Certificate Traceable to National Standards/UKAS Test Equipment, when purchased from us, at no extra charge.
Contact us for further information regarding Tietzsch MegaSafe EP 4Ex Earth resistance tester