Easy to use analyser designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.
The standard kit comes complete with the TPI 709R Flue Gas Combustion Analyser in a protective rubber boot, temperature sampling probe c/w external large water trap and unique in-lid water trap, soft carry case with shoulder strap, rechargeable battery pack & charger, pressure adaptors, ambient air probe, spare particle filter and instruction manual.
Comes complete with a calibration Certificate Traceable to National Standards when purchased new.
The Easy-To-Use, TPI 709R Flue Gas Combustion Analyser designed to measure CO, O2, Temperature & Pressure and calculate CO2 (in a flue), CO/CO2 ratio, efficiency and excess air. With a large, easy-to-read, backlit display, simple to navigate operating system.
It is designed to speed up testing with has a fast purging system and allows fuel selection during startup to prevent time wastage. It'll also remember the last fuel you used automatically and up to ten fuels can be selected: natural gas, LPG, light oil, heavy oil, bituminous coal, anthracite coal, coke, butane, wood and bagasse
The standard kit comes complete with the TPI 709R Flue Gas Combustion Analyser in a protective rubber boot, temperature sampling probe c/w external large water trap and unique in-lid water trap, soft carry case with shoulder strap, rechargeable battery pack & charger, pressure adaptors, ambient air probe, spare particle filter and instruction manual.
TPI 709R Flue Gas Combustion Analyser features:
The TPI 709R Flue Gas Combustion Analyser comes complete with the following standard accessories:
Options available:
TPI 709R Flue Gas Combustion Analyser Specifications |
||
Instrument |
||
Operating Temperature Range |
14°F to +122°F (-10°C to +50°C) |
|
Battery / Battery Life |
Rechargeable Ni-MH / > 6 Hours |
|
Charger Input Voltage |
115V or 230V: 50/60 Hz AC |
|
Fuels |
Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, |
|
Pressure Ranges |
mbar, kPa & inH2O |
|
Display |
Backlit Graphic LCD |
|
Data Storage |
50 sets of readings, multiple pages |
|
Time and Date |
24-Hour Real-Time Clock |
|
Dimensions |
7.8” (200mm) x 3.5” (90mm) x 2.4” (60mm) |
|
Weight |
500g |
|
Casing |
Rubber Boot as Standard |
|
Switch Off |
Failsafe |
|
Exhaust |
Safety Spigot |
|
Conforms to |
EN50379 |
|
Flue Temperature Probe |
||
Construction |
Pistol Grip with Stainless Steel Shaft |
|
Hose Length |
8.2’ (2500mm) |
|
Insertion Length |
7.9” (200mm) |
|
'K' Type Thermocouple Accuracy |
+/- 0.3% of full-scale, +/- 2°F (1°C) |
|
Maximum Temperature |
1472°F (800°C) |
|
Gases |
Range |
Resolution |
Accuracy |
|
Oxygen |
0-25% |
0.1% |
+/- 0.3% |
|
Carbon Monoxide |
0-10,000 ppm |
1 ppm |
(<20ppm) +/- 3 ppm |
|
Carbon Dioxide (calculated |
0-25% |
0.1% |
Calculated |
|
CO/CO2 Ratio |
0-0.999 |
0.001 |
+/- 0.3% |
|
Combustion Efficiency |
0-100% |
0.1% |
|
Pressure Measurement |
||
Selectable Ranges |
mbar, kPa and inH2O |
|
Range |
- 150 mbar to + 150 mbar |
|
Resolution |
0.01 mbar & 0.1 mbar |
|
TPI 709R Flue Gas Combustion Analyser comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding TPI 709R Flue Gas Combustion Analyser