TPI 725L Combustible Gas Leak Detector
TPI 725L Combustible Gas Leak Detector
Trace combustible gases in valves, pipes and fittings for leaks. Combustible gases that the 725L can detect is Methane (CH4), Butane (CH4H10), Propane C3H8), Gasoline (C4C12), Diesel (C12H23) and Kerosene (C12H26-C15H32).
Free of charge traceable calibration and certification with purchase of new TPI 725L combustible gas leak detector.
Contact us if you require any further assistance with any TPI product.
TPI 725L Combustible Gas Leak Detector
Trace combustible gases in valves, pipes and fittings for leaks. Combustible gases that the 725L can detect is Methane (CH4), Butane (CH4H10), Propane C3H8), Gasoline (C4C12), Diesel (C12H23) and Kerosene (C12H26-C15H32). The tick rate can be nullified to eliminate background gas concentration and pin point the leak source.
Features
- 40ppm methane sensitivity and bearing defects
- Trace natural gas lines and fittings for leaks frame to failure
- Check gas equipment for leaks
- Test propane tanks, fittings, lines, and heaters for leaks
- Test confined spaces for gas build-up
- High:>1000ppm Methane detected
- Tick:>40ppm Methane = Increased tick and green LED flash rate.
- Ready for use =Slow tick and green LED flash rate
- Low batteries =Red LED
- On/Off:Press to turn power on and auto zero
Press to nullify tick rate to pinpoint leaks
Press and hold to turn power off
TPI 725L Specifications |
||
|
Sensitivity |
> 40ppm Methane |
|
|
Operating Temp |
32° to 104°F or 0° to 40°C |
|
|
Response Time |
Instantaneous |
|
|
Battery |
1.5 volt, AAA Alkaline (2 each) |
|
|
Battery life |
3 hours continuous use |
|
|
Compliance with EN 50 081-1:1992, EN 50 082-1:1992, IEC 801-2:1984, IEC 801-3:1984, IEC 801-4:1988 |
||
Free of charge traceable calibration and certification with purchase of new TPI 725L combustible gas leak detector.
Contact us if you require any further assistance with any TPI product.
TPI 725L Instructions.pdf
