Fluke 1555 1550C Insulation Tester up to 10kV
The Fluke 1555 & 1550C is also available in kit form.
Included accessories;
Comes complete with a calibration Certificate Traceable to National Standards when purchased new.
The Fluke 1555 1550C Insulation Tester offers digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switch gear, motors, generators and cables.
Fluke 1555 1550C Insulation Tester can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class and CAT IV 600 V safety rating. With measurement storage and PC interface, the Fluke 1555 1550C Insulation Testers are perfect tools for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.
Fluke 1555 1550C Insulation Tester Features |
||
|
||
Insulation resistance measurement |
||
250 V |
< 200 kΩ 200 kΩ to 5 GΩ 5 GΩ to 50 GΩ > 50 GΩ |
unspecified 5 % 20 % unspecified |
500 V |
200 kΩ 200 kΩ to 10 GΩ 10 GΩ to 100 GΩ > 100 GΩ |
unspecified 5 % 20 % unspecified |
1000 V |
< 200 kΩ 200 kΩ to 20 GΩ 20 GΩ to 200 GΩ > 200 GΩ |
unspecified 5 % 20 % unspecified |
2500 V |
< 200 kΩ 200 kΩ to 50 GΩ 50 GΩ to 500 GΩ > 500 GΩ |
unspecified 5 % 20 % unspecified |
5000 V |
< 200 kΩ 200 kΩ to 100 GΩ 100 GΩ to 1 TΩ > 1 TΩ |
unspecified 5 % 20 % unspecified |
10000 V (1555 only) |
< 200 kΩ 200 kΩ to 200 GΩ 10 GΩ to 2 TΩ > 2 TΩ |
unspecified 5 % 20 % unspecified |
Bar graph range |
0 to 1 TΩ |
|
Insulation test voltage accuracy |
-0 %, +10 % at 1 mA load current |
|
Induced ac mains current rejection |
2 mA maximum |
|
Charging rate for capacitive load |
5 seconds per µF |
|
Discharge rate for capacitive load |
1.5 s/µF |
|
Leakage current measurement |
Range: 1 nA to 2 mA |
|
Capacitance measurement |
Range: 0.01 µF to 15.00 µF |
|
Timer |
Range: 0 to 99 minutes |
|
Live circuit warning |
Warning Range: 30 V to 660 V ac/dc, 50/60 Hz |
|
General specifications |
||
Display |
75 mm x 105 mm |
|
Power |
12 V lead-acid rechargeable battery, Yuasa NP2.8-12 |
|
Charger Input (AC) |
Charger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA |
|
This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only. |
||
Dimensions |
170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in) |
|
Weight |
3.6 kg (7.94 lb) |
|
Temperature (operating) |
-20 °C to 50 °C (-4 °F to 122 °F) |
|
Temperature (storage) |
-20 °C to 65 °C (-4 °F to 149 °F) |
|
Humidity |
80 % to 31 °C decreasing linearly to 50 % at 50 °C |
|
Altitude |
2000 m |
|
Enclosure sealing |
IP40 |
|
Input overload protection |
1000 V ac |
|
Electromagnetic compatibility |
EN 61326 |
|
Safety compliance |
CAT III 1000 V, CAT IV 600 V |
|
Pollution degree |
2 |
Fluke 1555 1550C Insulation Tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding the Fluke 1555 1550C Insulation Tester