Fluke 1555 1550C Insulation Tester

Fluke 1555 1550C Insulation Tester

Fluke 1587 FC Insulation Multimeter Tester

Fluke 1587 FC Insulation Multimeter Tester

Fluke 1577 Insulation Multimeter Tester

£718.80 £599.00
Availability: In stock
SKU
2157280

Two Powerful tools in one.  The Fluke 1577 combines a digital insulation tester with a full-featured, true RMS digital multimeter

Article Number: 2157280

  • Insulation test voltages 500V, 1000V
  • Insulation test 0.1 MΩ to 600 MΩ
  • Auto discharge of capacitive voltage
  • AC/DC voltage and milliamps

Comes complete with a calibration Certificate Traceable to National Standards when purchased new.

The Fluke 1577 Insulation Multimeter Tester combines a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 is ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

 Fluke 1577 Insulation Multimeter Tester features

  • Insulation test voltages 500V, 1000V
  • Insulation test: 0.1 MΩ to 600 MΩ
  • Auto discharge of capacitive voltage
  • AC/DC Voltage
  • DC millivolts
  • AC/DC milliamps
  • Resistance (0.1Ω to 50 MΩ)
  • Continuity
  • Three-year warranty
  • Remote probe, test leads, alligator clips
  • Rugged, utility hard case
  • Auto power off to save battery power
  • True-rms
  • Large display with backlight
  • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
  • CAT III 100V, CAT IV 600V measurement category
  • Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work

Specification:

Specifications
Voltage DC Maximum voltage 1000 V
Accuracy ±(0.2% +2)
Maximum resolution 0.001 V
Voltage AC Maximum voltage 1000 V
Accuracy ±(2% +3)
Maximum resolution 0.1 mV
Current DC Maximum amps 400 mA
Accuracy ±(1.0% +2)
Maximum resolution 0.01 mA
Current AC Maximum amps 400 mA
Accuracy ±(2.0% +2)
Maximum resolution 0.01 mA
Resistance Maximum resistance 50 MΩ
Accuracy ±(1.2% +2)
Maximum resolution 0.1 Ω
Insulation Test
Minumum test current @ 1kΩ/V 1 mA
Test voltages 500, 1000 V
Maximum resistance per test voltage  500 V
1000 V  600 MΩ
Maximum resolution per test voltage  500 V 0.1 MΩ
1000 V  0.1 MΩ
Accuracy per test voltage  500 V ±(2.0% +5)
1000 V  ±(2.0% +5)
Environmental Specifications
Operating temperature -20°C to +55°C
Storage temperature -40°C to +60°C
Humidity (without condensation) 0% - 95% (10°C - 30°C)
0% - 75% (30°C - 40°C)
0% - 40% (40°C - 55°C)
Operating altitude 2000 m
Safety Specifications
General IEC 61010-1:Pollution Degree 2
Measurement IEC 61010-2-033 CAT IV 600V / CAT III 1000V
Mechanical and General Specifications
Size 203 x 100 x 50 mm (with holster)
Weight 624 g
Warranty 3 years
Battery life alkaline Meter use 1000 hours
Insulation test use Meter can perform at least 1000 insulation tests with fresh batteries at room temperature.  These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
IP Rating IP 40
Includes:
  • Remote probe
  • Test leads
  • Alligator clips
  • Hard case
  • Four AA alkaline batteries
  • Quick reference guide
  • CD rom with manual

Fluke 1577 comes complete with a calibration Certificate Traceable to National Standards when purchased new.

 Contact us for further information regarding the Fluke 1577 Insulation Multimeter Tester

Write Your Own Review
You're reviewing:Fluke 1577 Insulation Multimeter Tester
Your Rating

Our Best Selling Products