Article Number: 4106866
The Fluke 424D Laser Distance Meter is a sophisticated meter packed with versatile features to save you more time in more situations and reduce errors
Comes complete with a calibration Certificate Traceable to National Standards when purchased new.
The Fluke 424D Laser Distance Meter is a sophisticated meter packed with versatile features to save you more time in more situations and reduce errors. Just point and click to instantly measure up to 100 meters (330 ft.), accurate to + 1 mm. No scales to interpret or misread. The extra bright laser supports easy targeting even at longer distances.
Extra features like a 180º inclination sensor, the corner angle feature, and a built-in compass make it easy to get accurate measurements in hard-to-reach locations. You'll be able to see the results more clearly on the large, four-line backlit display.
No matter your job, the Fluke 424D laser distance meter will help you do the work of two people on your own.
Fluke 424D Laser Distance Meter features:
Distance Measurement |
|
Typical measuring tolerance 1 |
±1.0 mm 3 |
Maximum measuring tolerance 2 |
±2.0 mm 3 |
Range At Leica Target Plate GZM26 |
100 m / 330 ft |
Typical range 1 |
80 m / 260 ft |
Range at unfavourable condition 4 |
60 m / 195 ft |
Smallest unit displayed |
6 / 30 / 60 mm (10 / 50 / 100 m) |
Ø Laser point at distances |
6 / 30 / 60 mm (10 / 50 / 100 m) |
Tilt Measurement |
|
Measuring tolerance to laser beam 5 |
±0.2° |
Measuring tolerance to housing 5 |
±0.2° |
Range |
360° |
General |
|
Laser class |
2 |
Laser type |
635 nm, < 1 mW |
Protection class |
IP54 |
Automatic laser off |
After 90 seconds |
Automatic power off |
After 180 seconds |
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 |
Up to 5,000 measurements |
Size (L x W x D) |
127 x 56 x 33 mm |
Weight (with batteries) |
158 g |
Temperature range Storage operation |
-25°C to +70°C (-13°F to +158°F) |
-10°C to +50°C (14°F to +122°F) |
|
Calibration cycle |
Tilt and compass |
Maximum altitude |
3000 m |
Maximum relative humidity |
85% at 20°F to 120°F (-7°C to 50°C) |
Safety |
IEC Standard No. 61010-1:2001 |
EN60825-1:2007 (Class II) |
|
EMC |
EN 55022:2010 |
EN 61000-4-3:2010 |
|
EN 61000-4-8:2010 |
|
1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C. |
Fluke 424D Laser Distance Meter comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding the Fluke 424D Laser Distance Meter