Fluke 424D Laser Distance Meter

Fluke 424D Laser Distance Meter

Fluke 6200-2 Pat Tester

Fluke 6200-2 Pat Tester

Fluke 62 Max I/R Thermometer

£118.80 £99.00
Availability: In stock
SKU
4130474

Article Number: 4130474

Fluke 62 Max I/R thermometer delivers single-laser targeting accuracy

The Fluke 62 MAX Infrared thermometer delivers many of the features of the Fluke 62 MAX+, but features a single laser and 10:1 distance to spot ratio.

Comes complete with a calibration Certificate Traceable to National Standards when purchased new.

Fluke 62 MAX Infrared thermometer description:

Fluke 62 Max I/R Thermometer delivers single-laser targeting accuracy

The Fluke 62 MAX Infrared thermometer delivers many of the features of the Fluke 62 MAX+, but features a single laser and 10:1 distance to spot ratio.

Can be used the to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents.

It is small in size and extremely easy to use. The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures in hard to reach areas.

With its IP54 rating for dust and water resistance you can rely on the 62 MAX to deliver accurate, repeatable temperature measurements, rain or shine, in even the dirtiest and dustiest industrial sites. And it’s rugged enough to take a 3-meter drop so no worries even if you work from a ladder.

Fluke 62 MAX Infrared thermometer features:

  • High and low alarms for rapid detection of temperatures outside the limits
  • Powered by a single, standard AA battery.
  • Withstands a 3 m (9.8 ft.) drop
  • Offers small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box
  • Features a large, backlit display to make data easier to read, even in dark areas.
  • Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements

Specifications

Temperature range

-30°C to 500°C (-22°F to 932°F)

Accuracy

±1.5°C or ±1.5% of reading, whichever is greater
-10°C to 0°C: ±2.0
-30°C to -10°C: ±3.0

Response time (95%)

< 500 ms (95% of reading)

Spectral response

8 to 14 microns

Emissivity

0.10 to 1.00

Optical resolution

10:1 (calculated at 90% energy)

Display resolution

0.1°C (0.2°F)

Repeatability of readings

±0.8% of reading or < ±1.0°C (2°F), whichever is greater

Power

AA battery

Battery life

10 hours with laser and backlight on

Physical Specifications

Weight

255 g (8.99 oz)

Size

175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)

Operating temperature

0°C to 50°C (32°F to 122°F)

Storage temperature

-20°C to 60°C (-4°F to 140°F), (without battery)

Operating humidity

10% to 90% RH non-condensing at 30°C (86°F)

Operating altitude

2000 meters above mean sea level

Storage altitude

12,000 meters above mean sea level

IP rating

IP 54 per IEC 60529

Drop test

3 meters

Vibration and shock

IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms

EMC

EN 61326-1:2006 EN 61326-2:2006

Standards and agency approval

Compliance

EN/IEC 61010-1: 2001

Laser safety

FDA and EN 60825-1 Class II

Fluke 62 MAX I/R thermometer comes complete with a calibration Certificate Traceable to National Standards when purchased new.

Contact us for further information regarding the Fluke 62 MAX Infrared thermometer

Write Your Own Review
You're reviewing:Fluke 62 Max I/R Thermometer
Your Rating

Our Best Selling Products