Article Number: 1281142
The Fluke 51 II delivers fast response with laboratory accuracy (0.05% + 0.3°C). You can use the 51 II to measure contact temperature on motors, insulation, breakers, pipes, corroded connections, liquids, and wires with industrial standard J, K, T, or E-type thermocouple temperature sensors.
Free of charge calibration and certification with purchase of new Fluke 51 II thermometer.
Contact us if you require any further assistance with any Fluke product.
The Fluke 51 II single input thermometer delivers fast response with laboratory accuracy (0.05% + 0.3°C). You can use the 51 II to measure contact temperature on motors, insulation, breakers, pipes, corroded connections, liquids, and wires with industrial standard J, K, T, or E-type thermocouple temperature sensors. The user friendly-front panel and large, backlit display make it easy to view results. And the sleep mode feature preserves battery life to give you a typical thousand hours of operation.
Temperature accuracy |
Above -100°C |
J, K, T, E-type: ±0.05% + 0.3°C |
Below -100°C |
J, K, E-type: ±0.20% + 0.3°C |
|
T-type: ±0.50% + 0.3°C |
||
Temperature |
J-Type |
-210°C to +1200°C |
K-Type |
-200°C to +1372°C |
|
T-Type |
-250°C to +400°C |
|
E-Type |
-150°C to 1000°C |
|
Temperature scale |
ITS-90 |
|
Applicable standards |
NIST-175 |
|
Display resolution |
0.1°C, 0.1 K < 1000 |
|
1°C, 1 K ≥ 1000 |
||
Operating temperature |
-10°C to +50°C |
|
Storage temperature |
-40°C to +60°C |
|
Humidity (without condensation) |
0% to 90%; 0°C to +35°C 0% to 70%; 0°C to +50°C |
|
Overvoltage category |
CSA C22.2 No. 1010.1 1992; EN 61010 Amendments 1,2 |
|
Agency approvals |
CE, CSA, TUV (pending) |
|
Size (L x W x D) |
173mm x 86mm x 38mm |
|
Weight |
400 g |
|
Batteries |
3 x AA batteries; typical 1000-hour life |
Free of charge calibration and certification with purchase of new Fluke 51 II thermometer.
Contact us if you require any further assistance with any Fluke product.