Article Number: 617735
The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 A to 1000 A DC and 1 A to 600 A AC and provides accurate current reading without breaking the circuit.
Free of charge calibration and certification with purchase of new Fluke i1010 AC/DC current clamp.
Contact us if you require any further assistance with any Fluke product.
The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 A to 1000 A DC and 1 A to 600 A AC and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters. Kit includes carry case.
Measurement type |
Hall sensor |
Nominal current range |
600A AC 1000A DC |
Continuous current range |
1A – 600A AC 1A – 1000A DC |
Maximum non-destructive current |
1000A |
Lowest measurable current |
0.5A |
Basic accuracy |
2% + 0.5A (% reading + floorspec) |
Useable frequency |
DC – 10kHz |
Output levels |
1 mV/A AC or DC |
Zero error adjustment |
Yes |
Safety |
CAT III 600V |
Maximum voltage |
600 V AC |
Warranty |
1 year |
Maximum conductor size |
1 x 30 mm, 2 x 25 mm |
Output cable length |
1.6 m |
Shrouded banana plugs |
Yes |
Battery life |
9 V, 60 H |
Free of charge calibration and certification with purchase of new Fluke i1010 AC/DC current clamp.
Contact us if you require any further assistance with any Fluke product.