IC-F3002/F4002 VHF/UHF Professional Two-Way Radio Series
The IC-F3002/F4002 series of entry level hand portable radios offer simple operation, outstanding audio, high performance and strong commercial build. The series, divided into the IC-F3002 (16 channel) for VHF and IC-F4002 (16 channel) for UHF, are ideal for a wide range of business and industry sectors that are searching for a simple yet dependable communication solution.
Easy to hear in noisy environments
The IC-F3002 series radio provides 1500 mW* loud and clear audio with Icom custom high power handling capacity speaker. Clear communication is available even in noisy environments.
(* Typical with internal speaker)
Low consumption for longer operating time
A new high efficiency FET of the IC-F3002 series reduces consumption current and provides up to 31 hours* of operating time with the BP-299, 3150 mAh (typical) supplied battery pack.
* TX: RX: Standby=5: 5: 90. Power save function ON.
Simple operation for instant communication
Simplicity is the key behind the design of the IC-F3002 series. The IC-F3002 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action — even while wearing gloves. This simple interface makes it ideal for high turnover environments and shift work where the radio is constantly passed from person to person.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111mm the radio is tested to dust protection and water-resistant equivalent to IP54 and 11 categories of MIL-STD-810 environmental test. In short, the IC-F3002 series is built rugged!
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signalling gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
Scan features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
Lone worker function
When the radio is not operated for a pre-set period, any radio operation is required with a beep sound. If the radio is not operated within that pre-set time, an emergency signal automatically transmits and alerts your co-worker or dispatcher to any potential trouble.
Other features
|
IC-F3002 |
IC-F4002 |
GENERAL |
||
Frequency coverage |
136-174 MHz |
400-470 MHz |
Number of channels |
16 Channels |
|
Type of emission |
8K50F3E/14K0F3E/16K0F3E |
|
Channel spacing |
12.5/20/25 kHz |
|
Power supply requirement |
7.2 V DC |
|
Current drain (approximate) |
|
|
TX High |
1.3 A |
1.6 A |
RX Max. Audio |
500 mA (internal SP) |
500 mA (internal SP) |
Standby |
75 mA |
70 mA |
Antenna impedance |
50 W |
|
Operating temperature range |
-25°C to +55°C (Radio Only) |
|
Dimensions (W x H x D) |
58 x 111 x 35.5 mm (with BP-299) |
|
Weight (approx.) |
272 g (with BP-299) |
|
TRANSMITTER |
||
Output power (at 7.2 V DC) |
5 W, 2 W, 1 W (Hi, L2, L1) |
|
Max Frequency deviation |
±5.0 kHz/±4.0 kHz/±2.5 kHz (Wide, Middle, Narrow) |
|
Frequency stability |
± 2.5 ppm |
|
Spurious emissions |
0.25 uW (≤ 1GHz) |
|
1.0 uW (> 1GHz) |
||
Residual modulations |
58/56/53 dB typical |
52/50/47 dB typical |
(Wide/Middle/Narrow) |
(Wide/Middle/Narrow) |
|
Audio harmonic distortion (AF 1kHz 40% deviation) |
1.0%/1.0%/1.5% typical |
|
(Wide/Middle/Narrow) |
||
Ext. Microphone connector |
3-conductor 2.5 (d) mm (1/10")/2.2 kW) |
|
RECEIVER |
||
Sensitivity (at 20 db SINAD) |
-4 dBuV typical emf |
|
Adjacent channel selectivity |
78/78/70 dB typical |
73/73/65 dB typical |
(Wide/Middle/Narrow) |
(Wide/Middle/Narrow) |
|
Spurious response rejection |
70 dB minimum |
|
Intermodulation rejection |
65 db minimum |
|
Hum and noise (with CCITT filter |
57/55/51 dB typical |
52/50/47 dB typical |
(Wide/Middle/Narrow) |
(Wide/Middle/Narrow) |
|
Audio output power |
|
|
Internal SP (with 8W Load) |
1500 mW typical (at 5% distortion) |
|
External SP (with 8W Load) |
400 mW typical (at 5% distortion) |
|
Ext. speaker connector |
3-conductor 3.5 (d) mm (1/8")/8 W) |
Contact us for further information regarding Icom IC-F3002 VHF & IC-F4002 UHF Radios