SKU: KT1780
Kewtech KT1780 is a two pole voltage and continuity tester with bright LEDs and phase rotation indication.
Kewtech KT1780 voltage tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Kewtech KT1780 voltage tester.
This popular two pole voltage and continuity tester is an essential tool in every electrician’s tool box used for voltage indication and the safe isolation of live circuits. The KT1780 will indicate voltage is present even with no batteries or if the batteries go flat so you can have peace of mind of indication when working with live circuits.
The KT1780 has bright LEDs which light up behind the voltage indication giving clarity even when working in dark spaces.
Voltage Test |
|
Voltage Range |
12 - 690 V AC/DC |
Peak Current |
Is <3.5mA (at 690V) |
Internal Battery Consumption |
Approx. 80mA (battery 3V, measuring 690V AC) |
Battery Life |
Approx. 1000 operations (30s ON/240s Off duty) |
Nominal Voltage |
12/24/50/120/230/400/690 AC (16~400Hz), DC (±) |
Tolerance (Threshold voltage) |
Light on at more than: 7 ± 3V (12V LED), |
: 18 ± 3V (24V LED), : 37.5 ± 4V (50V) |
|
75% ±5% of nominal voltage, (120/230/400/690V LED) |
|
Response Time |
<0.6s at 100% of each nominal voltage |
|
|
Single Pole Phase Test |
|
Voltage Range |
100 - 690V AC (45 ~ 100Hz) |
Phase Rotation Test |
|
System |
Three-phase 4-wire system |
200~690V phase-to-phase |
|
(100~400V earth-to-phase |
|
AC 50/60Hz |
|
Continuity Test |
|
Detection Range |
0-400 kW + 50% (23 ±5°C) |
Test current |
Approx. 1.5uA (battery 3V, 0W |
Internal battery consumption |
Approx. 80mA (battery 3V, 0W |
General |
|
Operating ref. conditions |
-15 ~ 55°C no Condensation max 85% RH |
Storage ref. condition |
-20 ~ 70°C no Condensation max 85% RH |
Safety standards |
IEC 61010-1:2010, IEC61243-3:2010, IEC 601010-031:2008 |
|
Category: CAT III 690V, CAT IV 600V pollution deg 2 |
|
IEC 61557-7:2007 |
IP rating |
IP65 (IEC 60529) |
Dimensions |
243 x 64 x 26 mm |
Weight |
190 g (including batteries) |
Batteries |
3V (2 x 1.5V AAA / LR03) |
Kewtech KT1780 voltage tester comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Kewtech KT1780 voltage tester.