Signatrol SL62T miniature temperature data logger
£178.80
£149.00
Availability:
In stock
SKU
Signatrol SL62T
Signatrol SL62T miniature temperature data logger that measures from -40°C to +85°C (-40°F to +185°F) with an accuracy of ±0.2°C / ±0.4°F. Compared to the SL50 series data loggers, all dLog data loggers have a larger memory, improved accuracy, non-volatile memory, so the data can be downloaded should the battery be depleted and a remaining battery life indicator.
All dLog data loggers communicate with the USB-powered NFC reader. The same reader can be used with all members of the dLog family.
The SL62T enclosure is constructed from food-grade materials and fully encapsulated, so they can be immersed into liquid without needing protective enclosures.
Signatrol SL62T data logger comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Signatrol SL62T data logger.
DESCRIPTION
The SL62T can be programmed to take readings from every 3 seconds to once every 24 hours. The data loggers can be programmed to start logging immediately, on a specific time and date, if the measured temperature goes above or below preprogrammed limits or even, after specific time period and also above or below preprogrammed temperature limits.
APPLICATION EXAMPLES
- Fridge & Freezer Monitoring
- Goods In Transit
- Museums
- Environmental Monitoring
- Facilities Management
SL62T is constructed from food safe materials conforming to FDA CFR21 177.1500 and EU 10/2011. The SL62T is fully encapsulated proving IP68 (submersible) waterproofing without the need for protective enclosures.
The SL62T is a self-contained, multiple use, small temperature data logger with the ability to record up to 9,500 temperatures over the temperature range of -40°C to +85°C with an accuracy of ±0.2°C.
Being only 22mm in diameter and 11mm thick, the SL62T is an incredibly small temperature data logger, ideal for use in confined spaces.
The memory can hold up to 9,500 readings and can be cleared at the start of each data logging session, allowing the data logger to be reused over and over.
*The SL60 NFC USB Interface lead and software are not included with this temperature data logger.
SPECIFICATION
| Power: | Internal Battery |
| Battery Life: | Typically 2 years. Remaining battery life is shown within the TempIT5 software |
| Battery Type: | Panasonic BR1632A (non replaceable / non rechargeable) |
| Measuring Range: | -40°C to +85°C (-40°F to +185°F) |
| SL62T Accuracy: | ±0.2°C (±0.4°F) |
| SL62T-A Accuracy: | ±0.1°C ±0.1% of Calibrated Span (±0.2°F ±0.1% of Calibrated Span) |
| Resolution: | 0.02°C (0.04°F) |
| Sample Rate: | 3 seconds to 24 Hours |
| Maximum Number of Readings Stored: | 9500 |
| Memory Limit: | Yes, programmable total number of readings can be set |
| Reusable When Memory Full: | Yes |
| Download Speed: | Approximately 60 seconds for 5000 readings |
| Weight: | Approximately 6g |
| Response Time: | 63% step change - 90 seconds in circulating air. 10% to 90% step change - 180 seconds in circulating air |
| Waterproofing: | IP68 - Protected against ingress of dust and the effects of continous immersion in water |
| Delayed Start: | Yes, you can specify a time and date to start logging up to 365 days in advance with one minute resolution |
| Triggered Start: | Yes, the data logger be set to start logging when the temperature goes above or below specified values |
| Software Alarms: | Yes, high and low alarms can be specified in the software |
| Food Safe Construction: | Yes |
| Material: | Zytel FGFE5171 Plastic intended to come into contact with food |
| Dimensions: | 22mm diameter x 11mm high |
| Warranty: | 1 Year |
| Approvals / Standards: | EN 12830, FDA CFR21 177.1500 & EU 10/2011 |
Signatrol SL62T data logger comes complete with a calibration Certificate Traceable to National Standards when purchased new.
Contact us for further information regarding Signatrol SL62T data logger.
Signatrol dLog SL60 series_Instruction_Sheet.pdfWrite Your Own Review
