Fluke T5-1000 Continuity Current Voltage Tester
£186.00
£155.00
Availability:
Out of stock
SKU
609385
Article Number: 609385
Key features
This voltage tester has been designed for residential, commercial and industrial electricians. It is the best frontline troubleshooting tool.
- Compact and rugged: designed for portability
- With this voltage tester you can automatically measure AC and DC voltage up to 1000 V with precise digital resolution
- Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester
- Troubleshoot resistance problems up to 1000 Ω
Fluke T5-1000 comes complete with a calibration certificate traceable to National Standards when purchased from us at no extra charge.
Contact us for further information regarding Fluke T5-1000
Fluke T5-1000 Continuity, Current and Voltage Tester Features:
The Fluke T5-1000 is a versatile troubleshooting tool to carry to every job site.
It is a voltage tester, continuity tester and current tester in one compact tool. Just select volts, ohms, or current and the tester does the rest.
Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
- Auto-selects between AC and DC voltage
- Suitable for industrial applications
Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- OpenJaw™ design allows for fast and easy current measurement
- Measure current more safely without metallic contact
Troubleshoot resistance problems up to 1000 Ω
- Measure resistance when troubleshooting motors, HVAC systems or electrical systems
- Built in continuity beeper provides fast and easy go/no-go tests
Work in tight spaces with detachable Slim Reach probe tips
- This voltage tester features a compact design with handy probe storage, easily fits in one hand
- The test lead slot in the back makes the meter an “extended handle” for the probe, leaving the other hand free to place the second lead
- Test leads accept Fluke accessory test clips
Key safety features
- Protected to EN61010-1 CAT IV 600 V / CAT III 1000 V rating
- Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester
- UL and CSA approved
Additional product features
- Withstands a 10 ft. (3 m) drop
- Offers Auto-off mode to conserve battery life
- The T5-1000 voltage tester fits into an optional holster that attaches to a belt and neatly stows test leads.
What’s Included:
- Fluke T5-1000 Voltage, Continuity and Current Tester
- 4 mm detachable probes
- Instruction sheet
Specifications: Fluke T5-1000 Continuity, Current and Voltage Tester
|
Specifications |
||
|
Jaw opening |
12.9 mm (0.5 in) |
|
|
Max wire size |
1/0 THHN Cable |
|
|
Current range AC rms |
0 to 100.0 A |
|
|
Accuracy AC current (50/60 Hz) |
3% ± 3 counts |
|
|
AC response |
Averaging |
|
|
Voltage range AC/DC |
0 to 1000 V |
|
|
Voltage accuracy |
||
|
AC |
1.5% ± 2 counts |
|
|
DC |
1% ± 1 count |
|
|
Resistance range |
0 to 1000 Ω |
|
|
Continuity beeper threshold |
On at < 25 Ω, off at > 400 Ω |
|
|
Volts indicator LED threshold |
Guaranteed on by 30 V AC |
|
|
Environmental Specifications |
||
|
Operating temperature |
-10°C to 50°C |
|
|
Storage temperature |
-30°C to 60°C |
|
|
Humidity (without condensation) |
||
|
0% to 95% (5°C to 30°C); |
||
|
0% to 75% (30°C to 40°C); |
||
|
0% to 45% (40°C to 50°C) |
||
|
Dust/water resistance |
Yes |
|
|
Operating altitude |
2000 meters max |
|
|
Temperature coefficient |
0.1 x (specified accuracy)/°C (< 18°C or> 28°C) |
|
|
Safety Specifications |
||
|
Measurement Category |
IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A ac |
|
|
Agency approvals |
CSA, TUV |
|
|
Maximum voltage |
1000 V between any terminal and earth ground |
|
|
Mechanical and General Specifications |
||
|
Size |
30.5 x 51 x 203 mm |
|
|
Weight |
300 g |
|
|
Warranty |
Two-years |
|
|
Battery life |
200 hour zinc chloride, 400 hour alkaline |
|
|
Battery type |
2 x AA |
|
|
Low battery indicator |
Yes |
|
|
Current sensor opening |
12.9 mm |
|
Fluke T5-1000 instructions.pdfWrite Your Own Review
Our Best Selling Products
